ENGINE AR-COMPLETE 4528472 - Caterpillar

4528472 ENGINE AR-COMPLETE Caterpillar parts D6T LGP, D6T XL

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4528472
452-8472
4528472

Weight: 2760 pounds 1251 kg.

Buy ENGINE AR-COMPLETE 4528472 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Related part:

4528472 SHORT BLOCK 20R2861 R

4528472 LONG BLOCK 20R4509 R

4528472 ENGINE AR-COMPL 20R5367 R

Compatible equipment models: 4528472:

TRACK-TYPE TRACTOR D6T LGP D6T XL Caterpillar

For full view, you need register

Information:

Illustration 2 g03881530
362-5261 Auxiliary Hydraulic Lines Gp
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. Plugging hoses and tubes helps to prevent fluid loss, and helps to keep contaminants from entering the system.
Illustration 3 g03881571
Tube to Stick
(1) 253-6454 Tube As
(4) 389-2407 Manual Valve Gp
(5) 173-7916 Half Clamp
(6) 1P-3704 Rectangular Seal
(8) 8C-8992 Locking Bolt
(9) 8T-4121 Hard Washer
(10) 8T-4183 Bolt
(12) 8T-4223 Hard Washer
(13) 8T-6685 Bolt
(14) 7X-0584 Hard Washer
Illustration 4 g03374018
Hose to Tube
(1) 253-6454 Tube As
(2) 356-8084 Hose As
(6) 1P-3704 Rectangular Seal
(7) 1P-5767 Half Flange
(11) 8T-4194 Bolt
(12) 8T-4223 Hard Washer
Install the lines group onto both sides of the stick
Illustration 5 g03374029
Hose to Boom Line
(2) 356-8079 Hose As
(6) 1P-3704 Rectangular Seal
(7) 1P-5767 Half Flange
(11) 8T-4194 Bolt
(12) 8T-4223 Hard Washer
Tighten all hardware and fitting to proper torque. Refer to Specifications, SENR3130, "Torque Specifications"
Illustration 6 g00687600
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue, causing serious injury, and possible death.Always use a board or cardboard when checking for a leak.Do not check for pin hole leaks in pump or motor hoses during a steer stall condition. If fluid is injected into your skin, it must be treated by a doctor familiar with this type of injury immediately.
Inspect the fittings for hydraulic leaks.