ENGINE AR 4626241 - Caterpillar

System Information
The IQAN-MD3 menu allows you to see module information and logs, set preferences, measure system I/O, and adjust parameters.
Illustration 1 g03030456
(1) Menu ButtonAdjust
To adjust any channels using the IQAN-MD3, perform the following steps.
Illustration 2 g02494097
Main Screen
Press the F1 button located on the Main menu screen beneath the "Adjust" icon. The Adjust screen will display the adjustable groups that have been set up in IQANdesign.
Illustration 3 g03668968
Adjust Screen
To select an adjustable group, press the Up or Down buttons until the group is highlighted and then press the "OK" button. A screen showing the adjustable parameters for the selected group will appear.Note: If a lock icon is next to the group in the list, a pin code is required to access that group. Press the Up, Down, and "OK" buttons to enter the pin code. Note: Certain channels may not be adjustable in default user mode. These channels will only be adjustable in Operator 1 or Operator 2 user mode.
Illustration 4 g02718661
Adjust Screen Group (default user)
Use the "OK" button to toggle between adjustable fields.
Use the Up and Down arrows to adjust a highlighted field.Note: To choose the plus or minus direction for adjusting, use the appropriate function button (F3 or F4).
To return to the adjustable parameters list, press the Back button (2) .
To return to the Main menu, press the F1 button located beneath the "Main" icon.Measure
To measure any channels using the IQAN-MD3, perform the following steps.
Press the F2 button located beneath the "Measure" icon on the Main menu screen. The Measure screen will display the measure groups that have been set up in IQANdesign.
Illustration 5 g03030501
Measure Screen
To select a Measure group, press the Up or Down button until the group is highlighted. Press the "OK" button. A screen showing the parameters for the selected group will appear.
Use the F2 Button to toggle between raw values and scaled values for the channels.
To return to the Measure screen, press the Back button (2) .
To return to the Main menu, press the F1 button located beneath the "Main" icon. Preferences
Illustration 6 g02565056
Preferences ScreenTo set preferences for the IQAN-MD3, press the F3 button located beneath the "Preferences" icon on the Main menu screen. From the Preferences screen, adjust the following fields: Display, Date/Time, and Language. Display
To make Display adjustments, press the F1 button beneath the "Display" icon. Refer to Systems Operation - Display Settings, "Change Light".Date/Time
To make Date/Time adjustments, press the F2 button beneath the "Date/Time" icon. Refer to Systems Operation - Display Settings, "Set Date and Time".Language
To make Language adjustments, press the F3 button beneath the "Language" icon. Refer to Systems Operation - Display Settings, "Change Language".Info
To access system information from the main menu screen, press the F4 button located beneath the Info icon. This will bring up the Info screen which displays the name of the loaded application. Note: The loaded application name is the file name and part number.
Illustration 7 g03030476
Info Screen (2) Back ButtonFrom the Info screen, information regarding Modules, Modems, and Logs can be accessed:
For Modules information, press the F1 button beneath the