ENGINE AR-CORE 4690113 - Caterpillar

Engine Identification
Cat dealers need information from the serial number plate to determine the components that were included with the engine. Cat dealers also need information from the information plate in order to determine the components that were included with the engine. This information permits accurate identification of replacement part numbers.Serial Number Plate
Illustration 1 g01659053
The serial number plate is on the left side of the cylinder block near the rear of the engine.The following information is stamped on the serial number plate: engine serial number, model and arrangement number.Information Plate
Illustration 2 g01659054
The information plate is on the left side top surface of the cylinder block in front of the front cylinder head.The following information is stamped on the information plate: maximum altitude of the engine, horsepower, high idle, full load rpm, fuel settings and other information.Identification of the Generator Set
Illustration 3 g01658114
The identification plate for the generator set is located on the right side of the barrel of the generator.When service is required, the information that is given on this plate should be used. The identification plate for the generator set includes the following information: serial number, model number and the rating of the generator set. The generator set consists of the engine and the generator. All pertinent generator data is also included on the plate in order to provide the information that is necessary to order parts.Serial Number Plate for the Generator
Illustration 4 g01658133
The serial number for the generator is located on the left side of the front of the generator.Output Lead Wiring
All generator lead wiring information can be found on a decal that is located on the side panel of the generator terminal box. If the generator is equipped with a circuit breaker, the decal may be found on the sheet metal of the circuit breaker panel.