ENGINE AR-REPL 4712661 - Caterpillar

Illustration 1 g03870463
Display Menu
From the "Display Setup" menu, use the arrow button to highlight the desired parameter. Then press the "OK" button. This exercise will allow access to that parameter screen. Then follow the screen prompts to adjust the parameter. All the parameters in this category relate to the operator preferences concerning the monitoring system display. The following parameters may be adjusted:Brightness - Adjust the level of brightness to the day or night setting, as needed.Language - Select a language.Units - Select one of the following options: Metric and English.Set Clock - Set the time.Format Clock - Format the clock setting to 12 hour and 24 hour.Brightness
There is a day and night brightness setting. The worklights-ON brightness level can be changed using the Display > Brightness menu.The brightness level can be changed in ten discrete steps:
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%To change the brightness level, press the UP or DOWN arrows. A brightness level of 0% is not allowed.Brightness settings will be stored in the Display memory, according to Application Profile.Language
Illustration 2 g06233315There are 39 languages available including the 30 listed below:
English
Spanish
French
Portuguese
German
Norwegian
Swedish
Finish
Dutch
Danish
Italian
Greek
Turkish
Indonesian
Russian
Japanese
Hungarian
Icelandic
Czech
Polish
Slovenian
Slovakian
Estonian
Latvian
Lithuanian
Portuguese (Brazil)
Serbian
Croatian
Bulgarian
RomanianUnits
The available Units are English and Metric.