ENGINE AR-COMPLETE 4752744 - Caterpillar

Illustration 1 g03093198
Typical example
Table 1
Specification for 4W-6062 Engine Oil Lines Gp and 261-2330 Engine Oil Lines Gp
Item Qty Part Specification Description
1 2 0S-1571 Bolt Use the following sequence to tightening the clamp bolts:
1. Snugly tighten the clamp assembly to the tube.
2. Tighten the clamp assembly to the elbow.
3. Tighten the clamp assembly to the tube.
2 2 0S-1594 Bolt
3 2 7N-7697 Plunger Cooling jet sequence valves must start to open at the following pressure difference is 130 30 kPa (19 4 psi).
Cooling jet sequence valves must be fully open at the following pressure difference is 200 30 kPa (29 4 psi)
4 1 2W-1053 Plug Torque to 100 15 N m (74 11 lb ft).
5 1 2W-1969 Bypass Valve Oil cooler bypass valve must open with the following pressure difference is 180 20 kPa (26 3 psi).
6 2 6B-9202 Spring Length under test force is 68.3 mm (2.69 inch).
Test force is 85.0 to 100.0 N (19.0 to 22.4 lb).
Free length after test is 112.8 mm (4.44 inch).
7 1 2W-1635 Spring Length under test force is 102.0 mm (4.02 inch).
Test force is 518.0 26.0 N (115.0 5.8 lb).
Free length after test is 143.4 mm (5.65 inch).