ENGINE AR- 4888196 - Caterpillar

Flow meter Tee Test Procedure - II
HYDRAULIC SCHEMATIC OF LOADER WITH FLOW METER INSTALLED Machines 43J1-43J2526, 73J1-73J2392, 31K1-31K956 and 81J1-81J3844 can be adapted by removing the 5K2503 Tube Assembly between the tank and pump and installing an 8K5010 Tube Assembly, 4J524 Seal and 4J522 Seal. A 7J8014 Filter Cover, 9S8010 Plug and 2S4078 Seal is needed on many of these machines.
FLOW METER INSTALLED
(See Tee Test Tooling Chart for parts reference)
LIFT AND TILT CYLINDERS BLOCKING LOCATIONS
(See Tee Test Tooling Chart for parts reference)
CYLINDER LINES ON HYDRAULIC TANK
1. Tilt cylinders (rod end). 2. Tilt cylinders (head ends). 3. Pump supply line. 4. Lift cylinders (head end). 5. Lift cylinders (rod end).
TACHOMETER DRIVE INSTALLED
(See Tee Test Tooling Chart for parts reference)
TILT CYLINDER BLOCKING LOCATION
(See Tee Test Tooling Chart for parts reference)