ENGINE AR 4P2701 - Caterpillar

Illustration 1 g00760888
Place Tooling (A) under rear frame (1) .
Illustration 2 g00760890
Place Tooling (B) under front axle (2) .
Illustration 3 g03228120
Install Tooling (D) to support the engine.
Illustration 4 g03616518
Remove screws (5) and plate (6) .
Remove screws (3) and plate (4) .
Illustration 5 g03616457
Remove plug (7) and drain the transmission oil into a suitable container. Refer to Operation and Maintenance Manual, SEBU9920, "Transmission Oil - Change" for the proper draining procedure.
Illustration 6 g03616496
Remove straps (8). Disconnect harness assemblies (10) and (9) .
Illustration 7 g03616497
Remove straps (11). Disconnect harness assembly (12) .
Illustration 8 g03616456
Support transmission (13) with Tooling (C). The weight of transmission (13) is approximately 120 kg (265 lb).
Illustration 9 g03616498
Disconnect hose assemblies (14) from the right side of the transmission assembly.
Illustration 10 g03616499
Disconnect harness assembly (15). Loosen bolt (16) and slide rod assembly (17) off the transmission lever.
Illustration 11 g03616501
Remove bolts (18) that retains transmission filler tube (19) .
Remove bolts (20) from transmission filler tube (19). Place transmission filler tube (19) to the side.
Illustration 12 g03616502
Remove the three bolts (21) .
Illustration 13 g03616504
Remove 12 bolts (22) .
Illustration 14 g03616503
Remove the four bolts (23) .
Reposition transmission (24) away from the engine to provide clearance. Lower transmission (24) to the ground.