AVSPARE.COM
parts catalog

ENGINE KT 5088168 - Caterpillar



5088168 ENGINE KT Caterpillar parts ENGINE
Rating:
86
Alternative (cross code) number:
CA5088168
508-8168
5088168
Caterpillar 5088168 ENGINE KT
Weight: 0.100 pounds 0 kg.

Buy ENGINE KT 5088168 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


When performing this adjustment, put the hydraulic activation control lever in the LOCKED position and stop the engine.
Sudden movement of the machine or release of oil under pressure can cause serious injury to persons on or near the machine.To prevent possible injury, perform the procedure that follows before testing and adjusting the hydraulic system.
Note: Make sure that you use an oil with the correct viscosity for the operating conditions. To determine the correct oil viscosity, refer to Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities" for your machine.The operational checks can be used to find leakage in the steering system. Also, the operational checks can be used to find a failed valve or a failed hydraulic and steering pump. Before you begin the checks, refer to Systems Operation, Testing and Adjusting, "Machine Preparation for Troubleshooting". The oil in the steering system must be at an operating temperature of 46 to 52 °C (115 to 126 °F).Release the parking brake and place the transmission direction and speed control lever in the NEUTRAL position.
Release the service brakes. Turn the steering wheel in both directions until the steering cylinders extend completely and the steering cylinders retract completely. The extension of the steering cylinders must be smooth and regular. The retraction of the steering cylinders must be smooth and regular.
Listen for noise from the hydraulic system and the metering pump.
Inspect the steering system for leaks and damaged components.ReferenceRefer to Troubleshooting, "Steering System" for further information concerning any problem and probable causes.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.