ENGINE AR-CORE 5223933 - Caterpillar

Linkage is shown in the SHUTOFF position.(1) Torque for studs ... 14 4 N m (10 3 lb.ft.) Linkage Adjustment:1. Make sure levers (B and C) are at the SHUTOFF position (fully counterclockwise).2. With both levers in the SHUTOFF position, adjust rod assembly (A) to fit between them.(Air Actuated Control)
(A) High idle position.(B) Low idle position.(1) Angle between vertical and the centerline of the governor control lever at low idle ... 12° 5°(Woodward EG-3P)
Linkage is shown in the SHUTOFF position.(1) Torque for studs ... 14 4 N m (10 3 lb.ft.) Linkage Adjustment:1. Make sure the output shaft of the actuator is in the SHUTOFF position (fully counterclockwise).2. Install lever (C) so that angle (B) between the lever and horizontal is ... 45° 5°3. With both levers (C and D) in the SHUTOFF position (fully counterclockwise), adjust rod assembly (A) to fit between them.