ENGINE AR-COMPLETE 5252499 - Caterpillar

5252499 ENGINE AR-COMPLETE Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5252499
525-2499
5252499

Buy ENGINE AR-COMPLETE 5252499 Caterpillar genuine, new aftermarket tractor parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Omix | 16534.11 | Oil Seal, Rear, Outer | OE Reference: 5252499 | Fits 1987-2006 Jeep YJ / TJ / XJ / ZJ / MJ with Dana 35 / 44

$6.29

16 Jun 2023
0.01[0.00] Pounds
Amazon.com

Omix | 16534.11 | Oil Seal, Rear, Outer | OE Reference: 5252499 | Fits 1987-2006 Jeep YJ / TJ / XJ / ZJ / MJ with Dana 35 / 44
Omix-Ada Made in Taiwan || Package Dimensions : 3.0 L x 0.5 H x 3.0 W (inches) || Package Weight : 0.07 pounds || OE Style

For full view, you need register

Information:

Illustration 1 g01295974
Typical exampleNote: Bolts A and B are on the same end of the rod cap that has bearing tabs and location pin (1) .
Before assembly, put 6V-4876 Lubricant on the bolt threads and all surfaces that make contact between the bolt and the cap.
Tighten bolts A and B.Torque ... 90 5 N m (65 4 lb ft)
Tighten bolts C and D.Torque ... 90 5 N m (65 4 lb ft)
Tighten bolts C and D again.Torque ... 90 5 N m (65 4 lb ft)
Tighten each bolt again.Rotation ... 90 5 degrees
Illustration 2 g01293991
Typical exampleThe connecting rod must be measured in three places. Measure diameter (2). The diameter should be 143.028 0.015 mm (5.6310 0.0006 inch).Note: This procedure only applies to new connecting rods.Measure diameter (3) and diameter (4). Add diameter (3) and diameter (4) together. Divide the sum by two. This calculation must also be 143.028 0.015 mm (5.6310 0.0006 inch). If the measurements do not meet the specification, replace the connecting rod after verifying that the tightening procedure is correct.