5424983 ENGINE AR- Caterpillar parts
Rating:
Alternative (cross code) number:
CA5424983
542-4983
5424983
CA5424983
542-4983
5424983
Weight: 1448 pounds 656 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
#US Replacement part for Carburetor Throttle Cable Kit for Polaris for Predator Outlaw 500 707200186 carbPart#5424983
Generic NOTE - Package included: 1 Set ONLY. Please check all carefully (photos and model) and make sure it will compatible with your original one. || Manufacturer Part Number: MK1008138 || OE/OEM Part Number: 7081285, 7081181, 7081170, 7080967, 3131678, 3131650 || Interchange Part Number: 3131574, 3131650, 7080967 || Superseded Part Number: 7081285, 7080709, 7081219
Generic NOTE - Package included: 1 Set ONLY. Please check all carefully (photos and model) and make sure it will compatible with your original one. || Manufacturer Part Number: MK1008138 || OE/OEM Part Number: 7081285, 7081181, 7081170, 7080967, 3131678, 3131650 || Interchange Part Number: 3131574, 3131650, 7080967 || Superseded Part Number: 7081285, 7080709, 7081219
For full view, you need register
Information:
Installation Procedure
Illustration 1 g00704131Note: Make sure that the ports of the valve are in the correct position.
Install pilot valves (21).
Install bolts (20).
Illustration 2 g00704128
Install bellows (19) on the pilot valve.
Illustration 3 g00704123
Position right travel pedal (16) on the pilot valve. Install bolts (18). Tighten the bolts to a torque of 33 3 N m (25 3 lb ft).
Position left travel pedal (15) on the pilot valve. Install bolts (17). Tighten the bolts to a torque of 33 3 N m (25 3 lb ft).
Illustration 4 g00704120
Install rubber pedal (14).
Install rubber pedal (13).
Illustration 5 g00704119
Install rubber floormat (12) around the travel pedals.
Illustration 6 g00704117
Install hydraulic fitting (10) in the pilot valve. Note: The bottom hydraulic fitting is the hydraulic fitting with the filter.
Install hydraulic fitting (11) in the pilot valve.
Illustration 7 g00704110
Install right travel pressure switch (9).
Install the harness assembly in the clip. Connect harness assembly (8).
Illustration 8 g00704108
Install left travel pressure switch (7).
Install the harness assembly in the clip. Connect harness assembly (6).
Illustration 9 g00704100
Connect hose assemblies (5) to the pilot valve. Tighten the hose assemblies to a torque of 37 4 N m (27 3 lb ft).
Illustration 10 g00704095Note: Make sure that the hose assemblies are connected in the correct locations.
Connect hose assemblies (4) to the pilot valve. Tighten the hose assemblies to a torque of 37 4 N m (27 3 lb ft).
Install high efficiency filters in place of the pilot filter, the case drain filter, and the return filter. Note: High efficiency filters should not be run for more than 250 hours before you change back to the standard filters.
Check the hydraulic system oil level. Reference: Refer to Operation and Maintenance Manual, "Lubricant Viscosities" for the proper oil viscosity.Reference: Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" for the correct filling procedure.
Start the engine, and check the operation of the pilot valve. Also, check for leaks. Stop the engine.
Obtain a hydraulic oil sample from the main S O S port. Reference: Refer to Operation and Maintenance Manual, "Sampling Interval and Location of Sampling Valve" for the correct location.
If the S O S sample exceeds ISO 18/15, flush the hydraulic system. Reference: Refer to Contamination Control Guidelines, SEBF8436, "Hydraulic System Flushing Procedure for 320C Hydraulic Excavators" for further information.
Illustration 11 g00704086
Position cover (2) on the machine. Install the washers and bolts (1).
Tighten bolts (3).
Illustration 1 g00704131Note: Make sure that the ports of the valve are in the correct position.
Install pilot valves (21).
Install bolts (20).
Illustration 2 g00704128
Install bellows (19) on the pilot valve.
Illustration 3 g00704123
Position right travel pedal (16) on the pilot valve. Install bolts (18). Tighten the bolts to a torque of 33 3 N m (25 3 lb ft).
Position left travel pedal (15) on the pilot valve. Install bolts (17). Tighten the bolts to a torque of 33 3 N m (25 3 lb ft).
Illustration 4 g00704120
Install rubber pedal (14).
Install rubber pedal (13).
Illustration 5 g00704119
Install rubber floormat (12) around the travel pedals.
Illustration 6 g00704117
Install hydraulic fitting (10) in the pilot valve. Note: The bottom hydraulic fitting is the hydraulic fitting with the filter.
Install hydraulic fitting (11) in the pilot valve.
Illustration 7 g00704110
Install right travel pressure switch (9).
Install the harness assembly in the clip. Connect harness assembly (8).
Illustration 8 g00704108
Install left travel pressure switch (7).
Install the harness assembly in the clip. Connect harness assembly (6).
Illustration 9 g00704100
Connect hose assemblies (5) to the pilot valve. Tighten the hose assemblies to a torque of 37 4 N m (27 3 lb ft).
Illustration 10 g00704095Note: Make sure that the hose assemblies are connected in the correct locations.
Connect hose assemblies (4) to the pilot valve. Tighten the hose assemblies to a torque of 37 4 N m (27 3 lb ft).
Install high efficiency filters in place of the pilot filter, the case drain filter, and the return filter. Note: High efficiency filters should not be run for more than 250 hours before you change back to the standard filters.
Check the hydraulic system oil level. Reference: Refer to Operation and Maintenance Manual, "Lubricant Viscosities" for the proper oil viscosity.Reference: Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" for the correct filling procedure.
Start the engine, and check the operation of the pilot valve. Also, check for leaks. Stop the engine.
Obtain a hydraulic oil sample from the main S O S port. Reference: Refer to Operation and Maintenance Manual, "Sampling Interval and Location of Sampling Valve" for the correct location.
If the S O S sample exceeds ISO 18/15, flush the hydraulic system. Reference: Refer to Contamination Control Guidelines, SEBF8436, "Hydraulic System Flushing Procedure for 320C Hydraulic Excavators" for further information.
Illustration 11 g00704086
Position cover (2) on the machine. Install the washers and bolts (1).
Tighten bolts (3).
Caterpillar SIS machinery equipment:
Caterpillar SIS
326D2 L Excavator JFG00001-UP (MACHINE) POWERED BY C7.1 Engine »
542-4983
ENGINE AR-PRIMARY
326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 Engine »
542-4983
ENGINE AR-PRIMARY
329D2 & 329D2 L Excavators RGA00001-UP (MACHINE) POWERED BY C7.1 Engine »
542-4983
ENGINE AR-PRIMARY
326D2 L Excavator REC00001-UP (MACHINE) POWERED BY C7.1 Engine »
542-4983
ENGINE AR-PRIMARY
329D2 & 329D2 L Excavators SHJ00001-UP (MACHINE) POWERED BY C7.1 Engine »
542-4983
ENGINE AR-PRIMARY
330D2 L Excavator SZK00001-UP (MACHINE) POWERED BY C7.1 Engine »
542-4983
ENGINE AR-PRIMARY
326D2 L Excavator MZH00001-UP (MACHINE) POWERED BY C7.1 Engine »
542-4983
ENGINE AR-PRIMARY
Parts engine Caterpillar catalog:
5424853
ENGINE AR-CORE
Caterpillar
Caterpillar
5424852
ENGINE AR-CORE
Caterpillar
Caterpillar
5421225
ENGINE AR-
Caterpillar
Caterpillar
5421224
ENGINE AR-
Caterpillar
Caterpillar
5421217
ENGINE AR-
Caterpillar
Caterpillar
5421123
ENGINE AR-
Caterpillar
Caterpillar
5427395
ENGINE GP-CORE
Caterpillar
Caterpillar
5425616
ENGINE AR-
Caterpillar
Caterpillar
5425615
ENGINE AR-
Caterpillar
Caterpillar
5425612
ENGINE AR-
Caterpillar
Caterpillar
5424985
ENGINE AR-
Caterpillar
Caterpillar
5424984
ENGINE AR-
Caterpillar
Caterpillar