ENGINE AR-CORE 5477363 - Caterpillar

Illustration 7 g06217884
Illustration 8 g06217885Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud M8 by 100 mm 4
B 165-2601 Silicone Sealant 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 9 g06225935
Illustration 10 g06225936
Typical example
Note: If the bridge piece for the cylinder block has been installed, the engine oil pan must be installed before Tooling (B) has cured.
Illustration 11 g06225937
Illustration 12 g06225939
Illustration 13 g06225941
Illustration 14 g06225942
Illustration 15 g06225943
Illustration 16 g06225945
Illustration 17 g06225946
Illustration 18 g06225947
Illustration 19 g06225948
Fill the engine. Refer to Operation and Maintenance Manual, "Engine Oil - Change". Refer to Operation and Maintenance Manual, "Engine Oil - Check" for the correct filling procedure.