ENGINE AR 6I3365 - Caterpillar

(S/N: HLS1-Up; KMW1-Up; BXE1-Up; FSH1-Up)
Illustration 9 g01249536
(1) Lubricate the sealing lips with the fluid that is being sealed. (2) Apply Tooling (F) to the wiper seal groove.Tooling (C) and Tooling (E) is used for the removal of bearing (3). Tooling (C) and Tooling (D) is used for the removal of bearing (6) . (4) Torque for the nut ... 2200 220 N m (1622 162 lb ft) (5) Torque for the head ... 600 130 N m (442 95 lb ft)Smart Cylinder
(S/N: HLS1-Up; KMW1-Up; BXE1-Up; FSH1-Up)
Illustration 10 g01251086
(1) Lubricate the sealing lips with the fluid that is being sealed. (2) Apply Tooling (F) to the wiper seal groove.Tooling (G) and Tooling (K) is used for the removal of bearing (3). Tooling (C) and Tooling (D) is used for the removal of bearing (4) . (5) Torque for the piston ... 600 60 N m (443 44 lb ft) (6) Torque for the retainer ... 20 4 N m (15 3 lb ft) (7) Torque for the head ... 600 130 N m (442 95 lb ft)(S/N: DDT1-Up; EAT1-Up; GKZ1-Up; LBE1-Up)
Illustration 11 g01250997
(1) Lubricate the sealing lips with the fluid that is being sealed. (2) Apply Tooling (F) to the wiper seal groove.Tooling (G) and Tooling (K) is used for the removal of bearing (3). Tooling (H) and Tooling (K) is used for the removal of bearing (4) . (5) Torque for the piston ... 600 60 N m (443 44 lb ft) (6) Torque for the retainer ... 20 4 N m (15 3 lb ft) (7) Torque for the head ... 600 130 N m (442 95 lb ft)Use Tooling (J) for installation of the seals in head (7) .Installation Procedure
Table 3
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-7615     Pin     2    
4C-6486 Stand     2    
8S-7641 Tube     2    
B     1P-5197     Retaining Ring Pliers     1    
Illustration 12 g01250681
Illustration 13 g01250657
Attach a suitable lifting device to boom cylinder (15). The weight of boom cylinder (15) is approximately 115 kg (255 lb). Install boom cylinder (15). Install pin (16). Install pin (14) and spacers (13). Use Tooling (B) in order to install retaining ring (12) .
Illustration 14 g01250654
Install right hook (11) and pin (9). Install bolt (10). Tighten nut (8). Install clamp (7).
Illustration 15 g01250656
Install left hook (5) and pin (6) .
Illustration 16 g01250647
Connect hose assemblies (3) and (4). Connect harness assembly (1). Connect clamp (2).
Illustration 17 g01250315
Remove Tooling (A) .