ENGINE AR 6I3537 - Caterpillar

Table 1
Required Parts    
New Part Number     Description     Quantity    
272-6658     Heat Shield     1    
9B-7237     Bolt     1    
106-4159     Spacer     1    
8T-2502     Bolt     3    
091-0081     Spacer     3    
8T-4896     Hard Washer     4    
3E-6909     Clip     1    Installation Procedure
Illustration 1 g02031774
Turbocharger water line (1) Mounting hardware (2) Clip (3) Bolt
Remove clip (2) and retain mounting hardware (1) .
Remove bolt (3). Retain the bracket from behind bolt (3) .
Illustration 2 g02032334
Turbocharger oil line (4) Clip (5) Spacer (6) Bolt
Remove bolt (6). Discard both bolt (6) and spacer (5). Retain clip (4) .
Illustration 3 g02033001
(7) 272-6658 Heat Shield (8) 8T-2502 Bolts (9) 8T-4896 Hard Washers (10) 091-0081 Spacers
Install heat shield (7) onto the cylinder head with bolts (8), hard washers (9), and spacers (10) .Note: The clip for the turbocharger oil line must be secured with bolt (8), washer (9), and spacer (10) at the front of the heat shield.
Illustration 4 g02033006
(9) 8T-4896 Hard Washer (11) 3E-6909 Clip (12) 106-4159 Spacer (13) 9B-7237 Bolt
Reinstall the bracket that was retained from Step 2 with bolt (13), washer (9), and spacer (12) .
Attach clip (11) to the bracket that was installed in the previous step with the mounting hardware that was retained in Step 1.
Illustration 5 g02033018
Secure clip (4) with bolt (8), washer (9), and spacer (10) .