ENGINE AR 7C1426 - Caterpillar

7C1426 ENGINE AR Caterpillar parts 160G

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7C1426
7C-1426
7C1426

Weight: 0.28 pounds 0 kg.

Buy ENGINE AR 7C1426 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compatible equipment models: 7C1426:

MOTOR GRADER 160G Caterpillar

For full view, you need register

Information:

Illustration 2 g01039990
Position plate (42) onto the manifold. Install bolt (41) .
Illustration 3 g01039989
Position selector pressure control valve (40) onto the plate. Install bolts (39) and bolt (38) .
Illustration 4 g01039987
Install O-ring seals (37) to each end of sleeves (36). Install sleeves (36) into the transmission case.
Illustration 5 g01039986
Install the O-ring seals onto manifold (33). Position manifold (33) onto the transmission case. Install bolt (34) and nuts (35) .
Illustration 6 g01039985
Install the O-ring seals and connect tube assemblies (31). Install bolts (30) and half flanges (32) that secure tube assemblies (31) onto manifold (33) .
Illustration 7 g01039984
Position manifold assembly (21) near the transmission. Install cable assembly (26) through the manifold assembly. Install the retaining ring that secures cable assembly (26) to the back side of manifold assembly (21). Position manifold assembly (21) on the transmission case. Install bolts (25) .
Connect harness assembly (29) to manifold assembly (21) .
Install switch assembly (23) to manifold assembly (21). Install bolts (24). Connect harness assembly (27) .
Install tubes (28) into manifold assembly (21) .
Illustration 8 g01039982
Position cover (19) and the gasket onto manifold assembly (21). Install bolts (20). Install the O-ring seals and plugs (22) into manifold assembly (21) .
Illustration 9 g01039981
Position control valve assembly (18) onto the selector pressure control valve.
Illustration 10 g01044629
Position cover (17) onto the control valve assembly and install bolts (16). Tighten five Bolts (X) to a torque of 48 4 N m (35 3 lb ft). Tighten the remaining bolts (16) to a torque of 30 4 N m (22 3 lb ft).
Illustration 11 g01039970
Position guard (15) onto the manifold assembly and install bolts (14) .
Illustration 12 g01039967
Position cover (8) onto the transmission case. Install bolts (10) .
Position hose assembly (13) .
Position harness assembly (11). Install bolts (12) .
Connect harness assemblies (9) and harness assembly (7) .
Illustration 13 g01039965
Position pressure reducing valve (4) and install bolts (3). Connect hose assemblies (2), hose assemblies (5), and hose assembly (6) .
Illustration 14 g00817049
Attach step assembly (1) to the machine.