ENGINE AR 7E0821 - Caterpillar

Illustration 1 g00712132
The 142-9304 Suspension Seat (1) 154-3986 Switch (2) 154-3985 Wire In order to prevent the seat switch from being disconnected, perform the following procedure:
Locate the 154-3986 Switch (1) and the 154-3985 Wire (2) that are under the right front of the suspension seat. The switch and the wire are part of the 142-9304 Suspension Seat. See Illustration 1.
Inspect the routing of the 154-3985 Wire (2) in order to ensure that the wire is not under tension when the suspension seat is fully forward.
Illustration 2 g00715024
(1) 154-3986 Switch (2) 154-3985 Wire (3) Tie-wrap
If wire (2) appears to be under tension, perform the following steps in order to secure the wire to the seat mounting rail:
Mark wire (2) at 102 mm (4.0 inch) from the 154-3986 Switch (1) .
Mark the seat mounting rail at 76 mm (3.0 inch) behind switch (2) .
Position wire (2) in order to align the mark on wire (2) and the mark on the seat mounting rail. Install a wire tie-wrap (3) at this point.Note: There should be 25 mm (1.0 inch) of slack in wire (2) between the wire tie-wrap (3) and switch (1) .