ENGINE AR 7E0880 - Caterpillar

Installation Procedure
Illustration 1 g00625792
Position manifold (15) with the transmission hydraulic control valves in the machine. Install bolts (14). Connect electrical connector (13).
Illustration 2 g00625791
Position sleeve (11) on the transmission hydraulic control valve. Install bolts (12) with the washers.
Illustration 3 g00625789
Install tubes (9). Install bolts (10) with the strips.
Illustration 4 g00625785
Install electrical connector (8) in the case. Install nut (7) on the connector.
Illustration 5 g00625566
Connect electrical connector (6).
Illustration 6 g00625783
Install plugs (5). Connect tube assembly (4).
Illustration 7 g00625780
Install a NEW gasket, plate (3), and guard (1) on the machine. Install bolts (2) with the washers. Note: If the rear cover is removed for any reason, replace the gasket with a new gasket for the applicable model. A new gasket is recommended in order to prevent leakage.