ENGINE AR 7N1398 - Caterpillar

Illustration 8 g01061123The safety messages for flash fire are located on the crankcase covers.
Flash fire may result in personal injury, if crankcase covers are removed within fifteen minutes after emergency shut down. Do not restart engine until cause for shutdown has been corrected.
Prelube Pump (8)
Illustration 9 g00306385The safety message for the prelube pump is located on the prelube pump.
Motor must be grounded in accordance with national electrical code and local codes, by trained personnel to prevent serious electrical shocks.Lifting provisions are intended for lifting the motor only.Motor has an automatic reset thermal protector. If motor overheats, thermal protector will open motor circuit.After motor cools sufficiently, thermal protector will reset without warning and restart motor.To service motor, disconnect power source from motor and any accessory devices and allow motor to come to a complete standstill.
Type 2
Illustration 10 g03334068
View of the right side of a typical G3500 Engine
Universal Warning (9)
Illustration 11 g01370904One safety message is located on the valve cover for cylinder #1. One safety message is located on the valve cover for cylinder #2.
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Cat dealer for replacement manuals. Proper care is your responsibility.
Hot Surface (10)
Illustration 12 g01384734One safety message is located on the oil cooler on the right side of the engine. One safety message is located on the crankcase cover on the left side of the engine.
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Shock Hazard (11)
Illustration 13 g01372247One safety message is located on the valve cover for cylinder #11. One safety message is located on the valve cover for cylinder #12.
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
Hot Surface (12)
Illustration 14 g01372256One safety message is located on the valve cover for cylinder #13. One safety message is located on the valve cover for cylinder #14.
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.