ENGINE OVERHAUL-BOTTOM 7W6278 - Caterpillar

Do not crank the engine for more than 30 seconds. Allow the starter to cool for two minutes before cranking again. Turbocharger damage can result if the engine rpm is not kept low until the oil gauge display verifies that the oil pressure is sufficient.
Keep the engine RPM low for a few seconds after the engine is started. Failure to allow the oil to warm-up will cause damage to the engine.
Do not use ether. This machine is equipped with glow plugs. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the engine starting procedure in the Operation and Maintenance Manual.
Glow Plugs - If the engine coolant temperature and the air temperature in the induction manifold is too low the glow plugs will be activated. The indicator on the monitor will come on when the engine start switch key is in the ON position. The engine can be started after the indicator goes off.