ENGINE AR 7W6852 - Caterpillar

7W6852 ENGINE AR Caterpillar parts E200B

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7W6852
7W-6852
7W6852

Weight: 1411 pounds 640 kg.

Buy ENGINE AR 7W6852 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

This part in 1 request: Show. This information for suppliers only!

#734292 7W6852

2021-10-06

Compatible equipment models: 7W6852:

EXCAVATOR E200B Caterpillar

Number on catalog scheme:

Caterpillar 7W6852 Parts scheme ENGINE AR

For full view, you need register

Caterpillar SIS machinery equipment:

Caterpillar SIS

E200B, EL200B TRACK-TYPE EXCAVATORS 6KF00001-UP (MACHINE) POWERED BY 3116 ENGINE » 7W-6852 ENGINE AR

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

E200B, EL200B TRACK-TYPE EXCAVATORS 6KF00001-UP (MACHINE) POWERED BY 3116 ENGINE

ENGINE » c942589
ENGINE » (S/N6KF 332-UP S/N7DF 784-UP) c942590
ENGINE » c942595

Information:

Start by:a. remove cylinder head assembly 1. Use Tool (A) to compress springs (1).
The locks can be thrown from the valve when the spring compressor is released if they are not in their correct position on the valve stem. To prevent possible personal injury, be sure to stay away from in front of the valve retainer and springs.
2. Remove the locks.3. Remove Tool (A), the valve, the rotocoil and the spring. If a valve can be used again, put identification on the valve for location at installation. 4. Use Tool (B) to check spring force. The specifications for the spring force are given in the Specifications Manual.5. Do Steps 1 through 4 again for the remainder of valves.Install Valves
1. Put clean engine oil on the valve stem. Install washer (3), spring (2), rotocoil (1) and the valve. 2. Use Tool (A) to compress the spring.3. Install locks (4) with the thick end up.
Locks can be thrown from valve when compressor is released, if they are not in their correct position on valve stem.
4. Remove the compressor and hit the valve with a soft faced hammer to be sure locks are in their correct position on the valve.5. Do Steps 1 through 4 again for the remainder of the valves.End By:a. Install cylinder head assembly.