ENGINE AR 9E1729 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1U-7505     Hydraulic Jack     1    Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Illustration 1 g01316624
Position Tooling (A) under crankcase guard (1). The weight of crankcase guard (1) is approximately 66 kg (145 lb).
Remove bolts (3) .
Do not do Steps 3 and 4 if you are only rotating crankcase guard (1) to the DOWN position.
Use Tooling (A) in order to rotate crankcase guard (1) to the DOWN position.
Remove pins (2) .
Use Tooling (A) in order to remove crankcase guard (1) from the machine.
Illustration 2 g01316644
Remove bolts (5) .
Use two people in order to remove crankcase guard (4) from the machine. The weight of crankcase guard (4) is approximately 23 kg (50 lb).Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1U-7505     Hydraulic Jack     1    
Illustration 3 g01316644
Use two people in order to position crankcase guard (4) to the machine. The weight of crankcase guard (4) is approximately 23 kg (50 lb).
Install bolts (5) .
Illustration 4 g01316624
Use Tooling (A) in order to position crankcase guard (1) to the machine. The weight of crankcase guard (1) is approximately 66 kg (145 lb).
Step 4 is not required if you are only rotating crankcase guard (1) to the UP position.
Use Tooling (A) in order to rotate crankcase guard (1) to the UP position.
Install pins (2) .
Install bolts (3) .End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".