ENGINE AR 9N5160 - Caterpillar

Cab Mounting
Dimensions for Cab Mountings
Illustration 1 g01234079
Table 1
Model    Material Specification    D1    
R1300G and R1300G II     MS109     44.5 + 0.1 - 0.00 mm (1.752 + 0.003 - 0.000 inch)    
R1600G     MS109    
76.15 + 0.00 − 0.03 mm (2.998 + 0.00 − 0.0011 inch)    
R1700G     MS109    
76.15 + 0.00 − 0.03 mm (2.998 + 0.00 − 0.0011 inch)    
R2900G     MS109    
76.15 + 0.00 − 0.05 mm (2.998 + 0.00 − 0.002 inch)    
Illustration 2 g01234083
The illustration is a graphic representation of the cab mountings which are used on the R1600G, R1700G and the R2900G. Some differences may exist.
Table 2
Model    Material Specification    D1    
R1300G and R1300G II     MS108    
76.20 + 0.00 - 0.03 mm (2.999 + 0.00 - 0.0011 inch)    
R1600G     MS108    
44.45 + 0.05 - 0.00 mm (1.750 + 0.002 - 0.000 inch)    
R1700G     MS108    
44.45 + 0.05 - 0.00 mm (1.750 + 0.002 - 0.000 inch)    
R2900G     MS107    
44.55 + 0.10 - 0.00 mm (1.753 + 0.003 - 0.000 inch)    
R2900G JLK829-Up     MS107    
78.03 + 0.03 - 0.00 mm (3.072 + 0.0011 - 0.00 inch)