EQUALIZER AS 2757311 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2 Start By:
Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove".
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. The capacity of the cooling system is approximately 42 L (11.1 US gal). Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g00986555
Remove bolts (1) and remove cover (2).
Illustration 2 g00986556
Loosen hose clamps (3) and disconnect hoses (4).
Illustration 3 g00986557
Loosen hose clamps (5) and disconnect hoses (6).
Illustration 4 g00986558
Install Tooling (A) and a suitable lifting device onto radiator assembly (8). The weight of radiator assembly (8) is approximately 41 kg (90 lb). Remove bolts (7) from radiator assembly (8). Remove radiator assembly (8) from the machine.
Illustration 5 g00986562
Remove Tooling (A) and remove bracket (11). Remove bolts (9) and remove side brackets (10).