EQUALIZER BAR 3T2284 - Caterpillar

Introduction
The Special Instruction, GEHS0083 is for the installation of the 238-2184 Auxiliary Control Wiring Gp . If you need more information about the installation of the Auxiliary Control Wiring Gp on your machine, consult your Cat dealer.Do not perform any procedure that is outlined in this publication without reading this article first. Safety Section
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Cat dealer for replacement manuals. Proper care is your responsibility.
Personal injury or death can result from sudden work tool movement.Sudden movement of the work tool can cause injury to persons near the work tool.To prevent injury or death, make sure that the area around the work tool is clear of personnel and obstructions before operating the work tool.
Required Parts
Table 1
Parts List for 238-2184 Auxiliary Control Wiring Gp Revision -02    
Item    Qty    Pt. No.    Part Name    
(1)     1     204-1611     Cable Strap    
(2)     1     238-2337     Bracket As    
(3)     1     377-8295     Switch Harness As    
(4)     2     3S-2093     Cable Strap    
(5)     1     4P-7581     Clip    
(6)     1     7K-1181     Cable Strap    Installation Procedure
Illustration 1 g03108916
(A) Connect to auxiliary two-way limit switch 2: "M938 GY", "235 BK" (B) Connect to auxiliary one way / two-way limit switch 1: "M937 GN", "235 BK" (C) Connect to chassis harness assembly: "M937 GN", "M938 GY", "235 BK" (2) 238-2337 Bracket As (3) 377-8295 Switch Harness As (4) 3S-2093 Cable Strap (5) 4P-7581 Clip (6) 7K-1181 Cable Strap
Illustration 2 g03109057
(D) Connect to auxiliary one way / two-way limit switch 1: "M937 GN", "235 BK" (E) Connect to auxiliary one way / two-way limit switch 2: "M938 GY", "235 BK" (1) 204-1611 Cable Strap (4) 3S-2093 Cable Strap
Illustration 3 g00104545
Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Cat dealer.
Position harness assembly (3) as shown. Connect harness assembly (3) to the auxiliary limit switch one with wires M937-GRN and 235-BK.
Connect harness assembly (3) to the auxiliary limit switch two with wires M938-GY and 235-BK.
Connect harness assembly (3) to the chassis harness with wires M937-GRN, M938-GY, and 235-BK.
Secure harness assembly.