parts catalog

EXHAUST AS 5088433 - Caterpillar

5088433 EXHAUST AS Caterpillar parts EXHAUST
Alternative (cross code) number:
Caterpillar 5088433 EXHAUST AS
Weight: 19 pounds 8 kg.

Buy EXHAUST AS 5088433 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 1 g03734709
(1) Accumulator (2) Desiccant (3) Inlet (4) Filter for the oil drain (5) Outlet (6) Standpipe (7) J-tubeLow temperature low-pressure refrigerant leaves the evaporator coil and passes into the accumulator (1) through the inlet (3). Liquid refrigerant that was not evaporated in the evaporator is stored in the bottom of the accumulator. Vapor refrigerant passes through either the standpipe (6) or the J-tube (7) before exiting through the outlet (5). The oil goes to the compressor through a filter for the oil drain (4). The accumulator stores some refrigerant in order to compensate for the changing system demands. These system demands can result from changing speeds in the compressor, varying heat loads, or small losses of refrigerant. The accumulator will contain desiccant (2) if the system does not contain an in-line dryer. The liquid refrigerant will pass through the desiccant, which will remove a small amount of moisture.

Parts exhaust Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.