EXTENSION 0316943 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00949252
Install gear (8), washer (9) and nut (10). The torque for the nut is 65 3 N m (48 2 lb ft). Replace O-ring seal (11) .
Illustration 2 g01051295
Position the unit injector hydraulic pump in the housing (front).
Support the unit injector hydraulic pump and install bolts (7) .
Illustration 3 g00949250
Connect hose assembly (6) to the fuel transfer pump.
Connect tube assemblies (4) and (5) .
Connect harness assembly (2) to unit injector hydraulic pump (1) .
Connect harness assembly (3) to the fuel pressure sensor.