EXTENSION-FENDER 2499326 - Caterpillar

Illustration 1 g00724251
(1) Torque for twenty-four bolts ... 300 40 N m (220 30 lb ft) (2) Outside diameter of the housing ... 174.50 0.08 mm (6.870 .003 inch) (3) Bearing diameters Outside ... 187.81 0.08 mm (7.394 .003 inch) Inside ... 175.41 0.13 mm (6.906 .005 inch) (4) Inside diameter of the support ... 187.33 0.05 mm (7.375 .002 inch) (5) Rubber toric seals and all the surfaces in contact with the seals must be clean and dry at assembly. Put a thin layer of oil on the surfaces of the metal seals that are in contact just before installation. The metal seals must be assembled square with the bore. The rubber toric seals must not bulge and the seals must not twist. (6) Torque for the plug ... 45 6 N m (33 4 lb ft) (7) Torque for the gauge ... 45 6 N m (33 4 lb ft) (8) Refer to Service Manual 950F II Wheel Loader Power Train, "Axle Housing and Bearing Preload - Adjust". (9) Outside diameter of trunnion ... 126.80 0.08 mm (4.992 .003 inch) (10) Bearing diameters Outside ... 140.23 0.13 mm (5.521 .005 inch) Inside ... 127.79 0.13 mm (5.031 .005 inch) (11) Torque for four bolts ... 570 80 N m (420 60 lb ft) (12) Inside diameter of support ... 139.75 0.05 mm (5.502 .002 inch)
Illustration 2 g00724281
(13) Torque for twenty-four bolts ... 300 40 N m (220 30 lb ft) (14) Torque for bleeder screw ... 11 4 N m (100 35 lb in) (15) Torque for six bolts ... 270 40 N m (200 30 lb ft) (16) Torque for eight bolts ... 475 60 N m (350 45 lb ft)
Illustration 3 g00724297
(17) Torque for the pressure relief fitting ... 13 4 N m (115 35 lb in)