EXTENSION GP-DRAIN 2788407 - Caterpillar

Removal Procedure
Illustration 1 g00619986
Remove bolts (1) and the washers from right side door (2) .
Open right side door (2) .
Illustration 2 g00654125
Loosen bolt (3) that holds alternator (5) to bracket (4) .
Illustration 3 g00654116
Loosen bolt (7) that holds alternator (5) to the mounting bracket.
Position alternator (5) toward the engine in order to release the tension on V-belts (6) .
Remove V-belts (6) from alternator drive pulley (8) .
Illustration 4 g00654129
Illustration 5 g00654136
Disconnect harness assemblies (9) from alternator (5) .
Remove bolt (3) and the washers from bracket (4) .
Remove bolt (7), the nut, and the washers from alternator (5) and the mounting bracket.
Remove alternator (5) from the mounting bracket.
Use a suitable puller in order to remove alternator drive pulley (8) from alternator (5) .Installation Procedure
Illustration 6 g00654116
Illustration 7 g00654129
Install alternator drive pulley (8) to alternator (5) .
Tighten the nut that holds alternator drive pulley (8) to alternator (5) to a torque of 102 7 N m (75 5 lb ft).
Position alternator (5) to the mounting bracket.
Install bolt (7), the nut, and the washer in order to secure alternator (5) to the mounting bracket.
Install V-belts (6) onto alternator drive pulley (8) .
Illustration 8 g00654125
Install bolt (3) and the washer in order to hold the alternator (5) to bracket (4) .
Adjust the belt tension. Refer to Operations and Maintenance Manual, "Alternator and Fan Belts - Inspect/Adjust/Replace".
Illustration 9 g00654144
Connect harness assemblies (9) to the alternator (5) .
Illustration 10 g00619986
Close right side door (2) .
Install bolts (1) and the washers.