EXTENSION GP-DRAIN 2845815 - Caterpillar

2845815 EXTENSION GP-DRAIN Caterpillar parts 795F AC, 795F XQ

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2845815
284-5815
2845815

Buy EXTENSION GP-DRAIN 2845815 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK,

Compatible equipment models: 2845815:

TRUCK 795F AC 795F XQ Caterpillar

Number on catalog scheme:

Caterpillar 2845815 Parts scheme EXTENSION GP-DRAIN

For full view, you need register

Information:

Note: Put identification marks on all hoses and on all wires for installation purposes. Plug the hoses. This will help to prevent fluid loss and this will help to keep contaminants from entering the system.
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Open the engine hood.
Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.
Illustration 1 g00361012
Illustration 2 g00361013
Open access door (1) on the left side of the cab. Remove air filter (2) .
Illustration 3 g00361014
Loosen two screws (3). Remove air filter cover (4) and the air filter.
Remove three bolts (5) .
Illustration 4 g00361015
Remove two bolts (6) .
Illustration 5 g00361016
Remove four bolts (7) and cover panel (8) .
Illustration 6 g00361017
Remove plastic cover (9) .
Illustration 7 g00361018
Disconnect electrical connector (10) .
Disconnect two refrigerant hoses (11) and two heater hoses (12) .
Remove four bolts (13) and coil assembly (14) .
Illustration 8 g00361019
Disconnect four electrical connectors (15) .
Illustration 9 g00361020
Illustration 10 g00361021
Remove six bolts (16) .
Illustration 11 g00361022
Remove three nuts (17) and cover (18) .
Illustration 12 g00361023
Remove nut (19) and the bolt. Remove motor (20) .