AVSPARE.COM
parts catalog

EXTENSION GP-EXHAUST 2P1658 - Caterpillar


2P1658 EXTENSION GP-EXHAUST Caterpillar parts 235
Rating:
12
Alternative (cross code) number:
CA2P1658
2P-1658
2P1658
Caterpillar 2P1658 EXTENSION GP-EXHAUST
Weight: 0.05 pounds 0 kg.

Buy EXTENSION GP-EXHAUST 2P1658 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 2P1658:

EXCAVATOR  235   Caterpillar
Number on catalog scheme:
  For full view, you need register

Information:

TYPE="LEVEL" DEPTH="1" @@@-->Assembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
B     1P-1861     Retaining Ring Pliers     1    
D     125-9793     Seal Guide     1    
E     183-4028     Seal Guide     1    
F     6V-2012     Depth Micrometer     1    
G     169-5464     Quick Cure Primer     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01020687
Illustration 2 g01020747
Use Tooling (G) in order to clean the shaft assembly and the counterbore in the housing.
Use Tooling (D) in order to install oil seal (2) into the water pump housing. Install the oil seal with the part number toward the housing. Ensure that the oil seal is flush with the housing. Do not lubricate the seal.
Install inner bearing (5) onto shaft assembly (8) .
Install shaft assembly (8) into water pump housing (9) .
Use Tooling (B) in order to install retaining ring (7) .
Use a suitable press with Tooling (E) in order to install water seal (10) onto shaft assembly (8). Install the water seal with the part number Upward. Ensure that the water seal is flush against the pump housing. Do not lubricate the seal.
Use a suitable press in order to install impeller (11) onto shaft assembly (8). The impeller should be flush with the top of the shaft assembly.
Use a suitable press in order to install gear (6). Install the gear to a height of 29.3 mm (1.15 inch). Use Tooling (F) in order to measure Dimension "A".
Install bearing (5). Ensure that the bearing is flush with the gear.
Install hex washer (1) and hex socket head bolt (4).
Install a new gasket and the cover. Tighten bolts (3) to a torque of 18 3 N m (13 2 lb ft).
Install a new gasket and the elbow assembly that connects the water pump to the radiator. Install a new gasket and the elbow assembly that connects the water pump to the engine oil cooler.End By: Install the water pump. Refer to Disassembly and Assembly, "Water Pump - Install".

Caterpillar SIS machinery equipment:



Parts extension Caterpillar catalog:

3F6166 EXTENSION
14E, 235, 245, 245B, 245D, 312D, 3508, 3508B, 3508C, 3512, 3516, 3516B, 611, 613, 615C, 844K, 906H, 906H2, 907H, 907H2, 908H, 908H2, 914G, 928G, 928H, 928HZ, 943, 950, 953, 966C, 988K, 990K, D10T2, G3...
5S9567 EXTENSION
120B, 120G, 12G, 130G, 140B, 140G, 14G, 14H NA, 160G, 16G, 16H NA, 235, 245, 561B, 613C, 621E, 631E, 633C, 637E, 666, 826C, 910, 916, 920, 924F, 930, 938F, 941, 943, 950, 950F II, 953, 955C, 955H, 963...
3503689 EXTENSION GP-EXHAUST
416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F
6N3925 EXTENSION GP-DRAIN
768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 777F
4N4101 EXTENSION GP-EXHAUST
120G, 12G, 130G, 140G, 14G, 16G, 235B, 235C, 235D, D8H
2157553 EXTENSION GP-MAIN FRAME
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, B...
8Y6883 EXTENSION GP-BACKREST
24H, 5130, 5130B, 5230, 5230B, 69D, 769D, 771D, 773D, 775D, 776D, 777D, 784C, 785C, 789C, 793C, 824G, 825G, 826G, 844, 854G, 914G, 924G, 924GZ, 924H, 924HZ, 928G, 928HZ, 930G, 938G, 938G II, 950G, 950...
8W3330 EXTENSION GP-BLADE
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160M
2534745 EXTENSION GP-SCREED
AP-1055D, AP-600D, AP-655D, AP555E, AS2302, BG-2455D, BG-260D, BG500E, BG600D, BG655D
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.