EXTENSION AS 3148469 - Caterpillar

Carriages and Forks
Illustration 11 g00727432
Typical Carriage and Forks
All Caterpillar approved carriages that are used on the machines that are covered by this manual can be installed directly to the quick coupler. All pallet forks can be installed on all carriages.All carriages are designed with backrests to support the load. Wide versions should be used for additional support when large loads are handled.Rotating carriages are powered by the hydraulic system of the machine. The carriages can be angled up to 12 degrees to the left or right in applications when loads are placed on uneven ground or when loads are raised from uneven ground.Buckets
Illustration 12 g00727434
Typical General Purpose Bucket
General purpose buckets are used for handling materials such as earth, sand, cement and aggregates.For the best operator visibility, travel with the bucket close to the ground.Ensure that the bucket that is installed is appropriate for the intended task.Boom Extension
Illustration 13 g00727439A boom extension is intended to be used in applications when additional reach or height is required in order to place light loads such as supports for roofs.Ensure that the correct load chart is referenced and that the capacities are not exceeded.Use only approved lifting equipment with a current certificate of serviceability when you attach a load to a boom extension. Short slings will prevent excessive load swing.Note: Changes in Local Regulations prohibit the use of certain boom extensions in Australia and New Zealand. See the list of approved work