3343102 EXTENSION GP-BASE Caterpillar parts
C27, C32
Rating:
Alternative (cross code) number:
CA3343102
334-3102
3343102
CA3343102
334-3102
3343102
GENERATOR SET,
Information:
Removal Procedure
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g01359322
Remove bolt (1).
Illustration 2 g01358976
Disconnect harness assemblies (2).
Illustration 3 g01359013
Remove seat (3). The weight of seat (3) is approximately 16 kg (35 lb).
Illustration 4 g01358978
Remove bolts (4). Repeat this step for the opposite side.
Use two people in order to remove seat suspension assembly (5). The weight of seat suspension assembly (5) is approximately 45 kg (100 lb). Installation Procedure
Illustration 5 g01358978
Use two people in order to install seat suspension assembly (5). The weight of seat suspension assembly (5) is approximately 45 kg (100 lb).
Install bolts (4). Repeat this step for the opposite side.
Illustration 6 g01359013
Install seat (3). The weight of seat (3) is approximately 16 kg (35 lb).
Illustration 7 g01358976
Connect harness assemblies (2).
Illustration 8 g01359322
Install bolt (1).
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g01359322
Remove bolt (1).
Illustration 2 g01358976
Disconnect harness assemblies (2).
Illustration 3 g01359013
Remove seat (3). The weight of seat (3) is approximately 16 kg (35 lb).
Illustration 4 g01358978
Remove bolts (4). Repeat this step for the opposite side.
Use two people in order to remove seat suspension assembly (5). The weight of seat suspension assembly (5) is approximately 45 kg (100 lb). Installation Procedure
Illustration 5 g01358978
Use two people in order to install seat suspension assembly (5). The weight of seat suspension assembly (5) is approximately 45 kg (100 lb).
Install bolts (4). Repeat this step for the opposite side.
Illustration 6 g01359013
Install seat (3). The weight of seat (3) is approximately 16 kg (35 lb).
Illustration 7 g01358976
Connect harness assemblies (2).
Illustration 8 g01359322
Install bolt (1).
Caterpillar SIS machinery equipment:
Parts extension Caterpillar catalog:
3760506
EXTENSION GP-FENDER
924K, 930K, 938K
924K, 930K, 938K
3323648
EXTENSION GP-EXHAUST
924K, 930K, 938K
924K, 930K, 938K
3925605
EXTENSION GP-FENDER
950H, 962H
950H, 962H
4333375
EXTENSION GP-EXHAUST
834K, 836K, 988K
834K, 836K, 988K