3391636 EXTENSION GP-MAIN FRAME Caterpillar parts
AP-600D, AP-655D, AP555E, AS4251C
Rating:
Alternative (cross code) number:
CA3391636
339-1636
3391636
CA3391636
339-1636
3391636
ASPHALT PAVER, ASPHALT SCREED,
Compatible equipment models: 3391636:
Number on catalog scheme:
For full view, you need register
Information:
5P8639 Press Group
Parts in the 5P8639 Press Group are: 1 - Base Plate2 - Hydraulic Cylinder Mounting Plate3 - Pin4 - Pusher5 - 5P8642 Clamp Pin6 - Legs7 - 5P9725 Hydraulic Cylinder Group8 - 5P8640 Bar Clamp9 - 5P8641 Bar Clamp10 - 5P8643 Post11 - Bolt12 - Nuts13 - Lock Ring5P8655 Tool Group
A - Standard type connecting rod Tools For Use On Taper Type Connecting Rod
1-5P8653 Adapter
2-6V2049 Adapter
3-5P8650 Adapter
4-5P8646 Adapter
5-6V3042 Adapter
6-6V4819 Spacer
7-5P8645 Adapter
8-5P8649 Adapter
9-6V3043 Spacer
10-6V3197 Spacer
11-5P8647 Spacer
12-5P8651 Spacer
13-6V3029 Spacer These tools are not part of any tool group. They must be ordered separately.
A - Taper area of connecting rod Additional Tools Needed
See the chart for additional tools needed for use with the tool groups.When some connecting rods are installed on the press group, the connecting rod part number must be put in a specific position, for removal and/or installation of a piston pin bearing. Use the charts that follow for a quick reference for the correct position of the connecting rod part number, and the tools needed according to the engine model and type of connecting rod. For those connecting rods in the chart that do not have a specific position for the part number, the connecting rod can be installed on the press group with the part number in either the "up" or "down" position. Assembly Of 5P8639 Press Group
1. Install 5P8643 Post Assembly (1) on base plate (2) as shown, and fasten it in position with bolt (3). 2. To operate the press group from the right side, install legs (4) in holes (A), (B) and (C), then install plate (5) and nuts (6) as shown. 3. To operate the press group from the left side, install legs (4) in holes (B), (C) and (D), then install plate (5) and nuts (6) as shown. 4. Put lock ring (7) on 5P9725 Cylinder (8), then turn the threads of cylinder (8) into plate (5). Tighten the setscrew in lock ring (7).5. Use bolt holes (E) to fasten the press group to a work bench.Removal And Installation Of Piston Pin Bearings - Tapered Connecting Rods
1. Heat the connecting rod in an oven to a temperature of 177°-204° C (350°-400° F). Never use a direct flame to heat a connecting rod. Be sure to remove the connecting rod bearings (bearings at crankshaft end of connecting rod), before the connecting rod is put in the oven. 2. Put the correct spacer (1) in base plate (2). For easier installation of spacer (1), lift ejector pin (3) far enough to put the spacer in alignment with the bore in base plate (2). 3. Put connecting rod (4) on base plate (2) so post assembly (5) is in the center of the piston pin bearing. Install pin (6) so it is in the center of the bore for the main bearing. 4. Install the correct adapter (7) and put hole (A) in alignment with hole (B) in the base plate. 5. Install the correct clamp bar (8) and clamp pin (9).
Parts in the 5P8639 Press Group are: 1 - Base Plate2 - Hydraulic Cylinder Mounting Plate3 - Pin4 - Pusher5 - 5P8642 Clamp Pin6 - Legs7 - 5P9725 Hydraulic Cylinder Group8 - 5P8640 Bar Clamp9 - 5P8641 Bar Clamp10 - 5P8643 Post11 - Bolt12 - Nuts13 - Lock Ring5P8655 Tool Group
A - Standard type connecting rod Tools For Use On Taper Type Connecting Rod
1-5P8653 Adapter
2-6V2049 Adapter
3-5P8650 Adapter
4-5P8646 Adapter
5-6V3042 Adapter
6-6V4819 Spacer
7-5P8645 Adapter
8-5P8649 Adapter
9-6V3043 Spacer
10-6V3197 Spacer
11-5P8647 Spacer
12-5P8651 Spacer
13-6V3029 Spacer These tools are not part of any tool group. They must be ordered separately.
A - Taper area of connecting rod Additional Tools Needed
See the chart for additional tools needed for use with the tool groups.When some connecting rods are installed on the press group, the connecting rod part number must be put in a specific position, for removal and/or installation of a piston pin bearing. Use the charts that follow for a quick reference for the correct position of the connecting rod part number, and the tools needed according to the engine model and type of connecting rod. For those connecting rods in the chart that do not have a specific position for the part number, the connecting rod can be installed on the press group with the part number in either the "up" or "down" position. Assembly Of 5P8639 Press Group
1. Install 5P8643 Post Assembly (1) on base plate (2) as shown, and fasten it in position with bolt (3). 2. To operate the press group from the right side, install legs (4) in holes (A), (B) and (C), then install plate (5) and nuts (6) as shown. 3. To operate the press group from the left side, install legs (4) in holes (B), (C) and (D), then install plate (5) and nuts (6) as shown. 4. Put lock ring (7) on 5P9725 Cylinder (8), then turn the threads of cylinder (8) into plate (5). Tighten the setscrew in lock ring (7).5. Use bolt holes (E) to fasten the press group to a work bench.Removal And Installation Of Piston Pin Bearings - Tapered Connecting Rods
1. Heat the connecting rod in an oven to a temperature of 177°-204° C (350°-400° F). Never use a direct flame to heat a connecting rod. Be sure to remove the connecting rod bearings (bearings at crankshaft end of connecting rod), before the connecting rod is put in the oven. 2. Put the correct spacer (1) in base plate (2). For easier installation of spacer (1), lift ejector pin (3) far enough to put the spacer in alignment with the bore in base plate (2). 3. Put connecting rod (4) on base plate (2) so post assembly (5) is in the center of the piston pin bearing. Install pin (6) so it is in the center of the bore for the main bearing. 4. Install the correct adapter (7) and put hole (A) in alignment with hole (B) in the base plate. 5. Install the correct clamp bar (8) and clamp pin (9).
Caterpillar SIS machinery equipment:
Caterpillar SIS
AP655D Asphalt Paver MAN00001-UP (MACHINE) POWERED BY C6.6 Engine »
339-1636
EXTENSION GP-MAIN FRAME
AP655D Mobil Trac Asphalt Paver GNN00001-UP (MACHINE) POWERED BY C6.6 Engine »
339-1636
EXTENSION GP-MAIN FRAME
AS4251C Screed DLB00001-UP »
339-1636
EXTENSION GP-MAIN FRAME
AP600D Asphalt Paver TFM00001-UP (MACHINE) POWERED BY C6.6 Engine »
339-1636
EXTENSION GP-MAIN FRAME
AP555E, BG555E Asphalt Paver A5D00001-UP (MACHINE) POWERED BY C4.4 Engine »
339-1636
EXTENSION GP-MAIN FRAME
Caterpillar parts catalog:
Parts extension Caterpillar catalog:
307B, 311B, 312B, 325B L, 330B, 330B L, 345B II, 345B L, 345C, 345D, 345D L, 349D, 349D L, 365B, 521B, 522B, 770, 772, 773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G LRC, 775G OEM, 776C, 777, 777B, ...
120H, 120M, 12H, 12M, 135H, 140H, 140M, 143H, 14H, 160H, 160M, 163H, 16H, 16M, 613C II, 926, 973, 980F, AP-600D, AP-655D, AP555E, AS4252C, BG500E, D4E SR, D5E, D5H, D6E, D6E SR, D6G, D6G SR, D6H, D6N
1G5370
EXTENSION-CURVE
10-20B, 8-16B, AP-1000, AP-1000B, AP-1050, AP-1055B, AP-600D, AP-650B, AP-655C, AP-655D, AP-800, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, AS2251, AS2301, AS2302, BG-225B, BG-225C, BG-2455C...
10-20B, 8-16B, AP-1000, AP-1000B, AP-1050, AP-1055B, AP-600D, AP-650B, AP-655C, AP-655D, AP-800, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, AS2251, AS2301, AS2302, BG-225B, BG-225C, BG-2455C...
1090734
EXTENSION-VALVE
AP-1000B, AP-600D, AP-800C, AP-800D, AP-900B, AP1000E, BG-225B, BG-260D, BG1000E, BG600D
AP-1000B, AP-600D, AP-800C, AP-800D, AP-900B, AP1000E, BG-225B, BG-260D, BG1000E, BG600D
1072288
EXTENSION AS
10 FT, 10-20B, 10B, AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455C, BG-2455D, BG-245C, BG-260D, BG100...
10 FT, 10-20B, 10B, AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455C, BG-2455D, BG-245C, BG-260D, BG100...
1072290
EXTENSION AS
10 FT, AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, ...
10 FT, AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, ...
2157555
EXTENSION AS
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, B...
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, B...
2157556
EXTENSION AS
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, B...
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, B...
2157557
EXTENSION AS
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, B...
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, B...
2157558
EXTENSION AS
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, B...
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, B...
1206673
EXTENSION AS
10-20B, 10B, AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-655D, AP-900B, AP555E, BG-2455C, BG-2455D, BG-245C, BG-260D, BG500E, BG600D, BG655D
10-20B, 10B, AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-655D, AP-900B, AP555E, BG-2455C, BG-2455D, BG-245C, BG-260D, BG500E, BG600D, BG655D
3380872
EXTENSION AS
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E
2889423
EXTENSION AR-SCREED
AP-600D, AP-655D
AP-600D, AP-655D
2Q8383
EXTENSION GP-PRECLEANER
972G, 972G II
972G, 972G II
1220598
EXTENSION AR
AP-800C, BG-225B
AP-800C, BG-225B
7R7505
EXTENSION GP-HYDRAULIC-RH
10 FT, AP-1050, AP-800
10 FT, AP-1050, AP-800
5E9825
EXTENSION GP-AUGER
10 FT, 10B, AP-1000, AP-1000B, AP-1050, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245C
10 FT, 10B, AP-1000, AP-1000B, AP-1050, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245C
1191411
EXTENSION GP-SCREED
10 FT, 10B, 8 FT, 8-16B, AP-800C, BG-225B
10 FT, 10B, 8 FT, 8-16B, AP-800C, BG-225B
2312204
EXTENSION AR
AP-655C
AP-655C
2997236
EXTENSION GP-MAIN FRAME
AP-600D, AP-655D, AP555E
AP-600D, AP-655D, AP555E
7X9183
EXTENSION GP-SCREED
10 FT, AP-1000, AP-1050, AP-800
10 FT, AP-1000, AP-1050, AP-800
2070494
EXTENSION GP-FENDER
TH62, TH63, TH82, TH83
TH62, TH63, TH82, TH83
3391628
EXTENSION GP-MAIN FRAME
AP-600D, AP-655D, AP555E, AS4251C
AP-600D, AP-655D, AP555E, AS4251C
2828514
EXTENSION GP-SCREED
AP-600D, AP-655D
AP-600D, AP-655D