EXTENSION-CLIP 3581186 - Caterpillar

Illustration 1 g01081772
(1) Water spray system button (2) Propel control leverIn order to activate the water spray system, press the inside button (1) on the propel control lever and release. In order to deactivate the water spray system, press the inside button (1) on the propel control lever (2) and release. The indicator for the water spray system (3) on the instrument console will illuminate when the water spray system is activated.Note: If the switch for the water spray pump is in the CENTER position and the propel control lever is in the NEUTRAL position, the water spray pump will not activate.
Illustration 2 g01081785
(3) Indicator for water spray system (4) Timer (5) Switch for water spray pump (6) Water level gaugeNote: Always check the water level in the water tank before you use the water spray system.Note: Contaminated water in the water tank can cause performance problems in the water spray system. Contaminated water in the water tank can cause problems with field reliability.Knob (4) controls the intermittent operation and the continuous operation of the water spray system.
Intermittent Spray (4) - Turn knob (4) clockwise in order to increase the duration of the water spray system. Turn knob (4) counterclockwise in order to decrease the duration of the water spray system.
Continuous Spray (4) - In order to have continuous water spray, turn knob (4) to the full clockwise position. Switch for Water Spray Pump (5) - Push down on the front of the switch in order to select the front pump. The front water spray pump will operate when the water spray system is activated.Push down on the rear of switch in order to select the rear water spray pump. The rear water spray pump will operate when the water spray system is activated. Move the switch to the center position in order to select the following conditions:
The front water spray pump will automatically activate when the propel control lever is in the FORWARD position.
The rear water spray pump will automatically activate when the propel control lever is in the REVERSE position.
The pump will automatically deactivate when the propel control lever is in the NEUTRAL position.Freeze Protection (If Equipped)
In order to protect the water spray system from freezing, perform the following steps.
Illustration 3 g01009932
Water spray tank
Illustration 4 g01009931
Fill the water spray tank with window washer solvent.
Drain the water spray tank. Refer to the Operation and Maintenance Manual, "Water Spray System - Drain" for further information on draining the water spray tank.
Close valve (4) in order to shut off the water supply from the water spray tank.
Open valve (5) in order to turn on the supply for the solvent.
Push down on the front of switch (2) in order to select the front pump.
Operate the water spray system for 30 seconds in order to