EXTENSION-CLIP 3583428 - Caterpillar

Table 9
Value    Default    
1 to 60 minutes     5 minutes    Engine Idle Shutdown Ambient Temperature Override Enable Status
Table 10
Value    Default    
Enabled
Disabled     Enabled    Delayed Engine Shutdown
If the delayed engine shutdown feature is enabled, the engine will continue to run for a set period after the keyswitch has been turned to the OFF position. This feature allows the engine to cool in a controlled manner.Delayed Engine Shutdown Enable Status
Table 11
Value     Default    
Enabled
    Disabled    Delayed Engine Shutdown Maximum Time
Table 12
Minimum     Maximum     Default    
1 minute     10 minutes     5 minutes    Fan Control
Engine Fan Type Configuration
Table 13
Value     Default    
Viscous Clutch
Direct Drive
Variable Pitch     Viscous Clutch    Engine Fan Cooling Map
Table 14
Value     Default    
Standard
High Ambient     Standard    Aftertreatment Configuration
Factory Installed Aftertreatment #1 Identification Number
Table 15
Value     Default    
Programmed
Not Programmed     Not Programmed    DPF #1 Soot Loading Sensing System Configuration Code
The "DPF 1 Soot Loading Sensing System Configuration Code" parameter determines the type of diesel particulate filter #1 soot loading sensing system. This parameter identifies orientation of soot sensor, and the geometry of the DPF.
Table 16
Value    Default    
20(Hex) to 7F(Hex)     0    High Soot Load Aftertreatment Protection
The "High Soot Load Aftertreatment Protection" parameter determines whether aftertreatment protection is enabled.
Table 17
Value    Default    
Disabled
Enabled     Disabled    System Settings
System Operating Voltage Configuration
The System Operating Voltage Configuration parameter is the operating voltage for the engine electrical system.
Table 18
Value    Default    
12 VDC
24 VDC     24 VDC    Security Access Parameters
CAN Communication Protocol Write Security
The CAN Communication Protocol Write Security parameter control the security required for writing information through the CAN bus.
Table 19
Value    Default    
Seed and Key
No Security     Seed and Key    CAN Communication Protocol Read Security
The CAN Communication Protocol Read Security parameter control the security required for reading information from the CAN bus.
Table 20
Value    Default    
Seed and Key
No Security     Seed and Key