EXTENSION GP-EXHAUST 4921664 - Caterpillar

Illustration 1 g02592836
(2) 7N-5279 Adapter As
(5) 2W-7320 Accessory Drive Gear
(7) 116-3242 Idler Gear As
Table 1
Specification for 8N-5678 Accessory Drive Gp
Item Qty Part Specification Description
1 2 7N-7539 Thrust Washer Thickness of one new thrust washer is 8.50 0.05 mm (0.335 0.002 inch).
3 3 - Before assembly, lightly lubricate the bore for the O-ring seals with the fluid that is being sealed.
4 1 7N-5874 Auxiliary Drive Shaft Diameter is 74.900 0.015 mm (2.9488 0.0006 inch).
Width of groove for thrust washer is 8.75 0.10 mm (0.344 0.004 inch).
6 1 127-5400 Bushing After assembly, bore is 75.000 0.055 mm (2.9527 0.0022 inch).
8 1 116-1365 Bearing After assembly, bore is 105.970 0.010 mm (4.1720 0.0004 inch).
Installation depth is 2.3 0.5 mm (0.09 0.02 inch).
9 1 7C-3259 Shaft Diameter is 105.880 0.020 mm (4.1685 0.0008 inch).