EXTENSION G. 6B5921 - Caterpillar

Illustration 11 g01370909
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for further information.Do Not Weld or Drill on ROPS (10)
Illustration 12 g01970802If equipped, this safety message is located on the left side pillar in the cab.
Structural damage, an overturn, modification, alteration, or improper repair, can impair this structure's protective capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate.Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.High Pressure Gas (11)This safety message is located on the accumulator.
Illustration 13 g01067549
This system contains high pressure gas. Failure to follow the instructions and warnings could cause an explosion, resulting in possible injury or death.Do not expose to fire. Do not weld. Do not drill. Relieve pressure before discharging.See Operation and Maintenance Manual for charging and discharging. See your Caterpillar Dealer for tools and detailed information.
Relieve Hydraulic Tank Pressure (12)This safety message is located on the hydraulic tank.
Illustration 14 g01371640
HYDRAULIC TANKRELIEVE TANK PRESSURE WITH ENGINE OFF BY REMOVING CAP SLOWLY TO PREVENT BURNS FROM HOT OIL.
Hot Surface (13)This safety message is located inside the engine compartment on the muffler.
Illustration 15 g01382641
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Crushing Hazard (14)This safety message is located in two places on the rear of the machine.
Illustration 16 g01382702
Machine swings. Stay back. Crushing hazard could cause serious injury or death.
Aerosol Starting Aid (15)This safety message is located near the air cleaner housing.
Illustration 17 g01372254
Do not use aerosol types of starting aids such as ether. Such use could result in an explosion and personal injury.
Refer to Operation and Maintenance Manual, "Engine Starting" for further information.