EXTRACTOR SET- 4C3384 - Caterpillar

Intended Use
This machine is classified as a Wheel Loader as described in "ISO 6165:2001". This machine normally has a front mounted bucket. The principal intended functions are digging, loading, lifting, carrying, and moving material such as earth, crushed rock, or gravel. Additional work tools allow this machine to perform other specific tasks.Application/Configuration Restrictions
Refer to "Machine Data" below for information about maximum machine weight.Lift arm height restrictions will be found in the Operation and Maintenance Manual for the appropriate work tool. With full fluids, the maximum fore and aft continuous slope operation for proper lubrication is 30 degrees.This machine is approved for use in environments with no explosive gases.Machine Data
This machine is equipped with a C13 Engine. Dimensions may vary with work tools.Basic machine specifications include the following:
Michelin L3 XHA2 29.5R25 tires or equivalent
Full fluids
80 kg (176 lb) operator
Air conditioner
Ride control
General-purpose bucket with BOCE 5.3 cubic meter (7.06 cubic yard)Shipping weight includes the following:
Michelin L3 XHA2 29.5R25 tires or equivalent
10% fuel in the tank
Air conditioner
Ride control
General-purpose bucket with BOCE 5.3 cubic meter (7.06 cubic yard)Basic machine specifications are listed in the following tables.
Table 1
980L Wheel Loader
Operating Weight 29,227 kg (64,434 lb)
Shipping Weight 28,785 kg (63,460 lb)
Maximum Length 9516 mm (375 inch)
Width 3447 mm (136 inch)
Height to Top of ROPS 3783 mm (149 inch)