AVSPARE.COM
parts catalog

EXTRACTOR KT 5584587 - Caterpillar


5584587 EXTRACTOR KT Caterpillar parts
Rating:
16
Alternative (cross code) number:
CA5584587
558-4587
5584587
Caterpillar 5584587 EXTRACTOR KT
Weight: 1 pounds 0 kg.

Buy EXTRACTOR KT 5584587 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Remove bolts (8).
Remove bolt (7) and the washer that holds the hose for the air cleaner to the baffle plate.
Remove bolts (9) and the washers.
Remove baffle plates (6). Note: The expansion tank will be removed with the counterweight. The air cleaner can be positioned inside the frame when the counterweight is removed.
Illustration 3 g00537808
Remove the cap from expansion tank (11). Cover the expansion tank (11).
Remove bolts (13), the washers, and plate (12) with air cleaner (10) from the counterweight.
Remove bolt (14), the washer, and the clamp from the counterweight.
Illustration 4 g00537818
Remove caps (15) from the top of the counterweight (16).
Install tooling (A) into holes for cap (15). Fasten a suitable lifting device to counterweight (16). Put slight tension on the counterweight with the hoist. The weight of the counterweight is approximately 750 kg (1650 lb).
Illustration 5 g00537828
Remove bolts (17) and spacers (18) that hold the counterweight to the frame of the machine.
Carefully remove counterweight (16) from the machine.
Illustration 6 g00537833
Put identification marks on shims (19) in order to locate the shims on the frame. The shims are used for alignment of the counterweight with components in the hood. Remove shims (19) from the frame. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description QTY
A 138-7575 Link Bracket 2 Note: Make sure that all surfaces are clean prior to installing the counterweight.
Illustration 7 g00537833
Put shims (19) into the original position on the frame of the machine.
Illustration 8 g00537818Note:
Install tooling (A) into holes for cap (15). Fasten a suitable lifting device to counterweight (16). Install the counterweight onto the frame of the machine. The weight of the counterweight is approximately 750 kg (1650 lb). Note: Do not remove the hoist from the counterweight until Step 3 is completed.
Illustration 9 g00537828
Apply 4C-5592 Anti-Seize Compound to the threads of bolts (17) and on end faces of spacers (18) that are in contact with the bolts. Install the spacers and bolts that hold the counterweight in position. Evenly tighten the bolts.
Illustration 10 g00537818
Install caps (15) in the top of counterweight (16). Tighten the caps to a torque of 12 4 N m (9 3 lb ft).
Illustration 11 g00537808
Position the clamp. Install the washer and bolt (14).
Install plate (12) with air cleaner (10) to the counterweight. Install the washers and bolts (13).
Uncover expansion tank (11). Install the cap onto expansion tank (11).
Illustration 12 g00537739
Install baffle plates (6).
Install bolts (8).
Position the clamp to the original position and install the washer and bolt (7).
Install the washers and bolts (9).
Illustration 13 g00889431
Position engine oil filter assembly (1) and support. Install bolts (2). Tighten the bolts. Install the hose for the engine oil filter assembly, bolt (4), the washer, the nut, and the clamp. Tighten the bolt.
Install baffle plate (2). Install the washers and bolts (5). End By:
Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".


Parts extractor Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.