EYE AS-LIFTING 3849657 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-3089 Offset Socket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Several different air starting motors are available for use. The air starting motors can have different configurations for the air lines. Examples of installing two different air starting motors are provided below.Installation of an Air Starting Motor Without the Air Tube Assemblies Attached
Illustration 1 g00597643
Attach a suitable lifting device to air starting motor (6). The weight of air starting motor (6) is approximately 48 kg (106 lb).
Install a new gasket for the joint between the cover of the air starting motor and the flywheel housing. Position the air starting motor and use Tooling (A) to install bolts (7).
Connect hose assembly (5).
Illustration 2 g01257888
Install air tube assemblies (4) and union nut (3).
Install bolts (2).
Connect hose assemblies (1).Installation of an Air Starting Motor With the Air Tube Assemblies Attached
Illustration 3 g01049697
Attach a suitable lifting device to air starting motor (11). The weight of air starting motor (11) with the air tube assemblies is approximately 86 kg (190 lb).
Install a new gasket for the joint between the cover of air starting motor (11) and the flywheel housing. Position air starting motor (11) and use Tooling (A) to install bolts (10).
Illustration 4 g01049692
Connect the air supply tube to elbow (9).
Connect harness assembly (8).
Turn ON the supply of pressurized air.