FAN GP-DFR 1003569 - Caterpillar

Crusher Tooth
Open the jaw of the work tool.
Lock the jaw in an open position. Refer to , "Crusher Tooth and Ripper Tooth - Replace" for the proper procedure.
Illustration 1 g02066993
Check all of the bolts for the crushing teeth (1) for the proper torque. Note: The bolt heads for the crushing teeth must be located on the outside of the movable jaw on both sides.Tighten the bolts for the crushing teeth to the standard torque. Refer to Specifications, SENR3130, "Torque Specifications" for the proper torque value.Ripper Tooth
Illustration 2 g02066994
P215, P225, P235
Check the bolt for the ripper tooth (2) for the proper torque. Note: The bolt head for the ripper tooth must be located on the outside of the movable jaw in order to tighten the bolt to the correct torque.Tighten the bolt for the ripper tooth to the standard torque. Refer to Specifications, SENR3130, "Torque Specifications" for the proper torque value.