FAN GP-CIRCULATING 1061744 - Caterpillar

Illustration 10 g00877545
Remove springs (18).
Illustration 11 g00877546
Install Tooling (C). Apply air pressure in order to unseat the piston. Note: Use air pressure in order to avoid damage to the piston.
Illustration 12 g00877547
Remove piston (19).
Illustration 13 g00877548
Remove steel plates (20). Remove plates (21).
Illustration 14 g00877549
Remove barrel (22) and the pistons as an assembly.
Illustration 15 g00877550
Mark pistons (23).
Remove pistons (23) from barrel (22).
Illustration 16 g00877551
Remove pistons (23) from plates (24) and (25).
Illustration 17 g00877583
Separate plates (24) and (25).
Illustration 18 g00877584
Use Tooling (D) in order to remove retaining ring (26).
Illustration 19 g00877585
Remove plate (28) and shaft (29) from housing (27).
Illustration 20 g00877586
Remove bearing race (30) from shaft (29).
Illustration 21 g00877587
Illustration 22 g00877588
Install Tooling (E). Remove bearing race (31) from shaft (29).
Illustration 23 g00877589
Remove O-ring seal (32) from housing (27).
Illustration 24 g01279836
Illustration 25 g00877629
Install Tooling (B). Remove bearing (33) from housing (27).
Illustration 26 g01279840
Remove seal (34) from the housing.