FAN GP-SUCTION 1121768 - Caterpillar

Bucket Positioner - Tilt Adjustment
Use caution to avoid possible personal injury when adjusting the bucket positioner.Stop the engine and lower all equipment to relieve the hydraulic pressure.Engage the parking brake and block the tires to prevent sudden movement of the machine.Keep unauthorized personnel off the machine.
1. Start the engine. Lower the bucket (attachment) to the ground.2. Position the bucket at the desired angle to the ground. Stop the engine and turn the engine start switch key to OFF and remove the key. Move the tilt control to TILT BACK detent. 3. Loosen three bolts (1) that clamps the switch to the tube assembly (2). Move the switch down the cylinder to increase the digging angle. Move the switch up the cylinder to decrease the digging angle.4. To test the adjustment, start the engine. Raise the bucket. Move the tilt control lever to TILT BACK detent.5. When the preset angle is reached, the tilt control lever should return to HOLD.Bucket Lift Kickout
Use caution to avoid possible personal injury when adjusting the attachment lift kickout.Keep personnel off the machine. Clear the area when working under or around the attachment linkage.With the attachment raised, proper support must be provided for the attachment and/or the linkage.
1. Start the engine. Raise the bucket (attachment) to the desired height and stop the engine.2. Block the bucket and the linkage. 3. Loosen the magnet clamp. Align the magnet with the switch assembly.4. Move the magnet counterclockwise to increase, or clockwise to decrease the bucket lift kickout height.5. Tighten the clamp.6. To check the adjustment, start the engine and move the bucket lift control to the RAISE detent.7. At the present lift height, the control lever should return to HOLD.