FAN AS-REV 1531962 - Caterpillar

Illustration 1 g01434386
Front view of engine
Illustration 2 g01434384
Top view of engine
Note: The oil supply and the oil drain holes should be in the vertical position with respect to the engine when the turbocharger group (1) is attached to the exhaust manifold.Use the following procedure to tighten the compressor clamp assembly and the turbine clamp assembly for the turbocharger group:
Tighten the clamp assemblies to 14 1 N m (125 9 lb in).
Lightly tap around the clamp assemblies with a soft faced hammer.
Again tighten the clamp assemblies to 14 1 N m (125 9 lb in). Note: Apply 4C-5599 Anti-Seize Compound on the threads of the six bolts (3). (2) Torque for eight locknuts ... 55 9 N m (41 7 lb ft)