1697787 FAN Caterpillar parts
313B
Rating:
Alternative (cross code) number:
CA1697787
169-7787
1697787
CA1697787
169-7787
1697787
Weight: 5 pounds 2 kg.
EXCAVATOR,
This part in 2 request:
Show.
This information for suppliers only!
2022-05-02
2021-05-19
Compatible equipment models: 1697787:
Number on catalog scheme:
2
For full view, you need register
Information:
Removal Procedure
The Power Train Electric Drive System and the Accessory Power System will contain hazardous voltage levels during machine operation and for a period of time after machine shutdown.Do not remove any covers that will expose energized electrical components while the engine is operating. Do not remove any covers that will expose the energized electrical components while the components remain energized following an engine shutdown.Do not perform any type of electrical maintenance on the orange hazardous voltage conductors, the power train components or the accessory power system components while the engine is operating.Do not perform any type of electrical maintenance on the orange hazardous voltage conductors, the power train components or the accessory power system components while the components remain energized following an engine shutdown.Always perform the safe shutdown and de-energizing procedure before performing electrical service on the Power Train Electric Drive System or the Accessory Power System.Failure to follow these instructions could result in personal injury or death.
The two top compartments on the front of the Inverter Cabinet contain low voltage control components. All of the other compartments in the cabinet contain high voltage components. The "Electrical Shutdown and Voltage Discharge" procedure must be performed before any of the high voltage compartments are entered.
Prepare the machine for maintenance. Refer to Operation and Maintenance Manual , "Prepare the Machine for Maintenance".
Shutdown and de-energizing the machine. Refer to Operation and Maintenance Manual, "Electrical Shutdown and Voltage Discharge".
Illustration 1 g03795256
Remove cover assembly (1).
Illustration 2 g03795262
Remove bolts (2). Disconnect wire assemblies (3). Remove bus bars (4). Note: Using a jumper harness, short capacitor assembly (6) by connecting the positive lead and negative lead in series.
Remove mounting bolts (5). Use two people to remove capacitor assembly (6). The weight of capacitor assembly (6) is approximately 41 kg (90 lb). Installation Procedure
Install capacitor assembly (6) in the reverse order of removal.
The Power Train Electric Drive System and the Accessory Power System will contain hazardous voltage levels during machine operation and for a period of time after machine shutdown.Do not remove any covers that will expose energized electrical components while the engine is operating. Do not remove any covers that will expose the energized electrical components while the components remain energized following an engine shutdown.Do not perform any type of electrical maintenance on the orange hazardous voltage conductors, the power train components or the accessory power system components while the engine is operating.Do not perform any type of electrical maintenance on the orange hazardous voltage conductors, the power train components or the accessory power system components while the components remain energized following an engine shutdown.Always perform the safe shutdown and de-energizing procedure before performing electrical service on the Power Train Electric Drive System or the Accessory Power System.Failure to follow these instructions could result in personal injury or death.
The two top compartments on the front of the Inverter Cabinet contain low voltage control components. All of the other compartments in the cabinet contain high voltage components. The "Electrical Shutdown and Voltage Discharge" procedure must be performed before any of the high voltage compartments are entered.
Prepare the machine for maintenance. Refer to Operation and Maintenance Manual , "Prepare the Machine for Maintenance".
Shutdown and de-energizing the machine. Refer to Operation and Maintenance Manual, "Electrical Shutdown and Voltage Discharge".
Illustration 1 g03795256
Remove cover assembly (1).
Illustration 2 g03795262
Remove bolts (2). Disconnect wire assemblies (3). Remove bus bars (4). Note: Using a jumper harness, short capacitor assembly (6) by connecting the positive lead and negative lead in series.
Remove mounting bolts (5). Use two people to remove capacitor assembly (6). The weight of capacitor assembly (6) is approximately 41 kg (90 lb). Installation Procedure
Install capacitor assembly (6) in the reverse order of removal.
Caterpillar parts catalog:
Parts fan Caterpillar catalog:
M312, M315
1495463
FAN-SUCTION
301.5
301.5
1665816
FAN AS
16M, 318B, 365B, 365B II, D7E, D7E LGP
16M, 318B, 365B, 365B II, D7E, D7E LGP
311, 315, 315B, 317B LN, 318B, E110B
1398767
FAN AS
315B L, 315C
315B L, 315C
1355765
FAN AS
312B L, 312C
312B L, 312C
311B, 311C, 311D LRR, 312B, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR
1805316
FAN GP-CIRCULATING
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307C, 307D, 311C, 312C L, 315C, 318C, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 324D FM, 324D FM LL, 325C, 325C FM, 325D FM...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307C, 307D, 311C, 312C L, 315C, 318C, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 324D FM, 324D FM LL, 325C, 325C FM, 325D FM...
1785485
FAN
307C, 311C, 320C
307C, 311C, 320C
305.5, 306, 307C, 307D, 308C, 308D
1910559
FAN-SUCTION
303.5, 304.5
303.5, 304.5
1397833
FAN
307B
307B