1931028 FAN AS-SUCTION Caterpillar parts
M312, M315
Rating:
Alternative (cross code) number:
CA1931028
193-1028
1931028
CA1931028
193-1028
1931028
Weight: 7 pounds 3 kg.
Information:
BLADE WIDTH
92.7
mm
BOLT CIRCLE DIAMETER
63.5
mm
DIAMETER OF PITCH CIRCLE HOLES
8.5
mm
HUB THICKNESS
3.8
mm
NUMBER OF BLADES
9
NUMBER OF PITCH HOLES
4
OD
558.8
mm
PILOT HOLE DIAMETER
40.9
mm
TYPE
SUCTION
WHEELED EXCAVATOR,
Number on catalog scheme:
16
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the canopy, if equipped.
Open the side access door.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g06259900
Remove the bolt, the washers, and disconnect ground strap (3) from power inverter (1).
Remove three bolts (2) and the three washers.
Illustration 2 g03703553
Remove four bolts (4) and plate assembly (5).
Illustration 3 g06259906
Remove two bolts (6), the plate, and the clamps.
Illustration 4 g03703558
Loosen the screw and disconnect harness assembly (7) from harness assembly (9).
Cut cable strap (10).
Remove two screws (8) and separate harness assembly (9) from the plate assembly.
Illustration 5 g03703571
Attach a suitable lifting device to operator platform (11). The weight of operator platform (11) is approximately 181 kg (400 lb).
Illustration 6 g03707089
Remove two bolts (12), the two washers, the plate, the shims, the bearing flange, and operator platform (11).Installation Procedure
Install operator platform (11) in the reverse order of removal.
Start By:
Remove the canopy, if equipped.
Open the side access door.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g06259900
Remove the bolt, the washers, and disconnect ground strap (3) from power inverter (1).
Remove three bolts (2) and the three washers.
Illustration 2 g03703553
Remove four bolts (4) and plate assembly (5).
Illustration 3 g06259906
Remove two bolts (6), the plate, and the clamps.
Illustration 4 g03703558
Loosen the screw and disconnect harness assembly (7) from harness assembly (9).
Cut cable strap (10).
Remove two screws (8) and separate harness assembly (9) from the plate assembly.
Illustration 5 g03703571
Attach a suitable lifting device to operator platform (11). The weight of operator platform (11) is approximately 181 kg (400 lb).
Illustration 6 g03707089
Remove two bolts (12), the two washers, the plate, the shims, the bearing flange, and operator platform (11).Installation Procedure
Install operator platform (11) in the reverse order of removal.
Caterpillar parts catalog:
Parts fan Caterpillar catalog:
1136352
FAN
3054, 3054B, 3056, 307, 312, 312B L, 312C, 315, 315B L, 317, 554, BG-225C, D7R II, M312, M315, M316C, M318C, M318C MH, M322C
3054, 3054B, 3056, 307, 312, 312B L, 312C, 315, 315B L, 317, 554, BG-225C, D7R II, M312, M315, M316C, M318C, M318C MH, M322C
1204709
FAN AS
M312, M315
M312, M315
1495463
FAN-SUCTION
301.5
301.5
1665816
FAN AS
16M, 318B, 365B, 365B II, D7E, D7E LGP
16M, 318B, 365B, 365B II, D7E, D7E LGP
311, 315, 315B, 317B LN, 318B, E110B
1398767
FAN AS
315B L, 315C
315B L, 315C
1355765
FAN AS
312B L, 312C
312B L, 312C
M318, M320
1805316
FAN GP-CIRCULATING
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307C, 307D, 311C, 312C L, 315C, 318C, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 324D FM, 324D FM LL, 325C, 325C FM, 325D FM...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307C, 307D, 311C, 312C L, 315C, 318C, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 324D FM, 324D FM LL, 325C, 325C FM, 325D FM...
1785485
FAN
307C, 311C, 320C
307C, 311C, 320C
305.5, 306, 307C, 307D, 308C, 308D
1910559
FAN-SUCTION
303.5, 304.5
303.5, 304.5
1397833
FAN
307B
307B
1697787
FAN
313B
313B