FAN GP-BLOWER 2352324 - Caterpillar

Illustration 1 g03053436
Table 1
Specification for 245-6117 Camshaft Gp
Item Qty Part Specification Description
1 16 5P-0076 Bolt Torque to 55 7 N m (41 5 lb ft).
- - - Diameter (A) of camshaft bearing journal is 85.88 0.02 mm (3.381 0.001 inch).
2 1 5B-5821 Dowel Extension (B) of dowel is 12.0 0.5 mm (0.47 0.02 inch).
3 2 7N-3218 Thrust Washer Thickness (C) is 8.50 0.05 mm (0.335 0.002 inch).
Width of the groove in the camshaft for thrust washer is 8.75 0.05 mm (0.344 0.002 inch).
Illustration 2 g03053437
245-6119 Camshaft As
Illustration 3 g03053439
245-6122 Camshaft As
Table 2
Item Qty Part Specification Description
4 2 4N-1650 Dowel Extension (D) of dowel is 22.0 0.5 mm (0.87 0.02 inch).
Illustration 4 g03053440
Table 3
Item Qty Part Specification Description
- - - Use the following procedure in order to determine the actual camshaft lobe lift (E):
1. Measure camshaft lobe height (F).
2. Measure the base circle (G).
3. Subtract the base circle (G) from the camshaft lobe height (F). The difference is the actual camshaft lobe lift.
- - - Specified camshaft lobe lift (E) for:
Inlet lobe is 9.201 mm (0.3622 inch).
Exhaust lobe is 9.901 mm (0.3898 inch).