2450565 FAN GP-CIRCULATING Caterpillar parts
ES12F
Rating:
Alternative (cross code) number:
CA2450565
245-0565
2450565
CA2450565
245-0565
2450565
UNINTERRUPTIBLE PWR SU,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$861.70
28 Jun 2020
11.53[4.95] Pounds
-: -
SKF LARGE DIAMETER SEAL (#2450565)
SKF LARGE DIAMETER SEAL (#2450565)
SKF LARGE DIAMETER SEAL (#2450565)
Number on catalog scheme:
602
For full view, you need register
Compatible equipment models: 2450565:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-5255 Hydraulic Jack 2
Be sure that the shaft of the track carrier roller and the bore in the mounting bracket on the undercarriage frame are clean and free of dirt.
Illustration 1 g00365374
Put the track carrier roller in position in the mounting bracket. The track carrier roller weighs approximately 12 kg (26 lb). Adjust the carrier roller until Distance (B), the distance between the outside face of the mounting bracket and the carrier roller is 4.5 0.5 mm (0.18 0.02 inch).
Illustration 2 g00481121
After adjusting the position of the carrier roller in the mounting bracket, tighten bolt (2). Tighten the bolt to a torque of 570 60 N m (420 44 lb ft).
Be sure that the carrier roller rotates smoothly by hand. Slowly lower the track assembly to the carrier roller with Tooling (A) .
Tighten the tension of the track. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust" for the procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-5255 Hydraulic Jack 2
Be sure that the shaft of the track carrier roller and the bore in the mounting bracket on the undercarriage frame are clean and free of dirt.
Illustration 1 g00365374
Put the track carrier roller in position in the mounting bracket. The track carrier roller weighs approximately 12 kg (26 lb). Adjust the carrier roller until Distance (B), the distance between the outside face of the mounting bracket and the carrier roller is 4.5 0.5 mm (0.18 0.02 inch).
Illustration 2 g00481121
After adjusting the position of the carrier roller in the mounting bracket, tighten bolt (2). Tighten the bolt to a torque of 570 60 N m (420 44 lb ft).
Be sure that the carrier roller rotates smoothly by hand. Slowly lower the track assembly to the carrier roller with Tooling (A) .
Tighten the tension of the track. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust" for the procedure.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts fan Caterpillar catalog:
2704241
FAN GP-SUCTION
770, 772
770, 772