FAN 2938067 - Caterpillar

(1) 1A-8096 Spring for ball check valve: Length under test force ... 14.3 mm (.56 in)Test force ... 18 1 N (4.0 .3 lb)Free length after test ... 23.8 mm (.94 in)Outside diameter ... 8.1 mm (.32 in)(2) 7B-8194 Spring for stem: Length under test force ... 29.4 mm (1.16 in)Test force ... 133 11 N (30 2.4 lb)Free length after test ... 55.2 mm (2.17 in)Outside diameter ... 23.1 mm (.91 in)(3) Approximate dimension between face of striker (stud assembly) and mounting bracket ... 39.6 mm (1.56 in) To check the striker adjustment:(a) Put a 12.7 mm (.50 in) ball of putty (or similar material) on the front frame stops.(b) Raise the bucket about 30.5 cm (1 ft) and release the brakes.(c) With the engine at high idle, steer rapidly into both stops.(d) The thickness of the putty must then be 3.0 to 4.6 mm (.12 to .18 in) after the turns.(e) If necessary, adjust the strikers until this dimension is correct.