FAN SHROUD 2951642 - Caterpillar

Illustration 1 g03157777
Table 1
Specification for 381-2171 Front Lines Gp
Item Qty Part Specification Description
- 12 7K-1181 Cable Strap Sharp corners at the cutting edge of each cable strap shall not be allowed.
1 2 148-8378 Elbow As Torque to 29 2 N m (257 18 lb in).
2 1 123-4750 Check Valve Torque to 34 to 38 N m (25 to 28 lb ft).
3 1 361-8918 Hose As Torque to 40 to 44 N m (30 32 lb ft).
Illustration 2 g03157816
View of area A
Table 2
Item Qty Part Specification Description
4 1 150-4027 Tee As Torque to 29 2 N m (257 18 lb in).
5 2 148-8378 Elbow As Torque to 29 2 N m (257 18 lb in).
6 1 194-2903 Elbow As In case of aluminum manifold, tighten to 41 5 N m (30 4 lb ft).
Illustration 3 g03157817
View of area B
Table 3
Item Qty Part Specification Description
7 1 148-8435 Tee As In case of aluminum manifold, tighten to 24 2 N m (212 18 lb in).
8 1 338-6970 Pressure Sensor Gp Out put type is PWM.
Out put frequency is 500 Hz
Before assembly, apply a thin layer of hydraulic oil to out side diameter of male thread.
Use tightening tool with 6 PT or 12 PT 1-1/16 inch deep socket.
Torque to 64 3 N m (47 2 lb ft).
9 1 164-5546 Tee As Torque to 29 2 N m (257 18 lb in).
10 2 7I-2272 Bolt Torque to 6.9 0.7 N m (61.1 6.2 lb in).
11 2 148-8378 Elbow As Torque to 24 to 26 N m (212 to 230 lb in).
12 1 369-8367 Check Valve Gp Torque to 29 2 N m (257 18 lb in).
13 1 148-8439 Tee As Torque to 24 to 26 N m (212 to 230 lb in).
14 4 8T-3647 Bolt Torque to 21.0 to 22.5 N m (185.9 to 199.1 lb in).